Pro/Forums - View Single Post

blue68f100 · 09-15-2008, 10:05 AM

DD works if you follow the instruction on this forum.

Unless you want a door stop don't try converting it to a 2200.

The 1000 are not very fast units so allow ample time for things to happen. But if you get the 1x2 LED pattern it did not find the OS. Make sure you set the jumpers correctly on the new HD.

The FAQ's will give you most all the info you require.

Adaptec/Overland? has been providing Assist and 3.4.807 on request. To my knowledge only a few have been able to get v4.0.860 from them free. But every country has different laws when it comes to hardware and copyrighted material.

09-15-2008, 10:05 AM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Sanp 1000M DD works if you follow the instruction on this forum. Unless you want a door stop don't try converting it to a 2200. The 1000 are not very fast units so allow ample time for things to happen. But if you get the 1x2 LED pattern it did not find the OS. Make sure you set the jumpers correctly on the new HD. The FAQ's will give you most all the info you require. Adaptec/Overland? has been providing Assist and 3.4.807 on request. To my knowledge only a few have been able to get v4.0.860 from them free. But every country has different laws when it comes to hardware and copyrighted material. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820