Pro/Forums - View Single Post

blue68f100 · 09-16-2008, 09:46 AM

You will brick the 1000 if you do it.

A bios change causes a reboot then it will lockup. Because the HW does not match the firmware, and no ways to correct it because you loose access.

Trust me on this one.

09-16-2008, 09:46 AM	#4
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Sanp 1000M You will brick the 1000 if you do it. A bios change causes a reboot then it will lockup. Because the HW does not match the firmware, and no ways to correct it because you loose access. Trust me on this one. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820