Pro/Forums - View Single Post

blue68f100 · 09-29-2008, 10:31 AM

Welcome to the forum,

It's recommended that you start a new thread unless your problem is the same as the original post.

I do not know of any one that is not using the factory release BIOS. The hardware has a special chip that identifies it as Snap Hardware. the GOS checks for this. So your ROM is probably the problem. I do not know if your bios allow you to monitor the boot process with a null modem cable off com1 with a terminal. This is how I check things out when I have a problem and can not access the gui.

David

****Snap Moderator****

09-29-2008, 10:31 AM	#9
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 520 question Welcome to the forum, It's recommended that you start a new thread unless your problem is the same as the original post. I do not know of any one that is not using the factory release BIOS. The hardware has a special chip that identifies it as Snap Hardware. the GOS checks for this. So your ROM is probably the problem. I do not know if your bios allow you to monitor the boot process with a null modem cable off com1 with a terminal. This is how I check things out when I have a problem and can not access the gui. David **Snap Moderator** __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 Last edited by blue68f100; 09-29-2008 at 10:41 AM.