Re: Plz HELP --- installed 4x new HD on my SNAP4000 and now its DEAD
Now it these are brand NEW and every thing set to factory settings you may need to use ASSIST to locate the server and do the initial setup. Once the network side is setup Assist is no longer needed unless you reset the network settings.
Both 4000 and 4100 have the OS stored in flashram. Install drive 1 and start the unit. It will take ~ 10 min for the OS to be decompressed and loaded. After 10 min you should be able to connect to the server. The 4000 has a history of weak/bad power supplies. I would suggest using a ps from a pc to power your HD's. This should get you up.
You should not need to do the boot track transfer. That is the options used on 1x00, 2200 models.
You may need to reference the FAQ's in my signature.
|