Pro/Forums - View Single Post

blue68f100 · 12-03-2008, 08:21 PM

There is a reset button behind the front bezel.

The second nic port is what you want to connect to if the 1st one is not getting a DHCP from the router. If not the def is 10.10.10.10 if no DHCP is found.

You can use a null modem to the com1 port. (19.2k, n,8,1) Not sure on the baud rate, it's been a while.

12-03-2008, 08:21 PM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: 4500 no display from vga port There is a reset button behind the front bezel. The second nic port is what you want to connect to if the 1st one is not getting a DHCP from the router. If not the def is 10.10.10.10 if no DHCP is found. You can use a null modem to the com1 port. (19.2k, n,8,1) Not sure on the baud rate, it's been a while. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820