Pro/Forums - View Single Post

blue68f100 · 01-15-2009, 04:59 PM

A cold boot is the correct way to transfer the OS to a new HD. But if you have deiaster recovery active this needs to be stopped before doing the cold boot, as well as AV. Other wise it will mark the drive as part of a set. The working unit will do a resync when the original hd is reinstalled. Hot swap will be the easiest to start the resync.

01-15-2009, 04:59 PM	#4
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap Server 4400 reset A cold boot is the correct way to transfer the OS to a new HD. But if you have deiaster recovery active this needs to be stopped before doing the cold boot, as well as AV. Other wise it will mark the drive as part of a set. The working unit will do a resync when the original hd is reinstalled. Hot swap will be the easiest to start the resync. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820