Pro/Forums - View Single Post

blue68f100 · 03-04-2009, 09:28 PM

The opening between the back and HD must be covered for the thermal sensor to get a valid reading. The fan is thermal controlled. I measured the temp control range at one time but I can not recall what the numbers were. Some wire the fan directly to the HD power to make it run 24/7.

03-04-2009, 09:28 PM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 1100 Fan The opening between the back and HD must be covered for the thermal sensor to get a valid reading. The fan is thermal controlled. I measured the temp control range at one time but I can not recall what the numbers were. Some wire the fan directly to the HD power to make it run 24/7. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820