Pro/Forums - View Single Post

blue68f100 · 03-12-2009, 08:20 AM

Either the PS is bad, or a bad system board. I've seen the nic port drop off line after 2-3 days. The only way to get it back was to power off and let every thing cool for a day. I've also seen bad solder connections on the PS jack and the fuse loops. They do go bad, the 1100 has been around for over 10 yrs now so there starting to get tired and fail.

03-12-2009, 08:20 AM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: New "old" problem Either the PS is bad, or a bad system board. I've seen the nic port drop off line after 2-3 days. The only way to get it back was to power off and let every thing cool for a day. I've also seen bad solder connections on the PS jack and the fuse loops. They do go bad, the 1100 has been around for over 10 yrs now so there starting to get tired and fail. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820