Pro/Forums - View Single Post

blue68f100 · 03-23-2009, 09:24 AM

Is there a setting in the BIOS to reset to factory setting?

With the null cable setup were you able to watch the complete boot process?

If you have all of the orig hd's. Install them in the order they were removed. Setup a R5 then fail drive 1. May want to do a cold boot in between HD's. Install new let it rebuild once complete do the next and continue through the process till all have been replaced. The delete the R5 reboot, reboot then build a R5.

I have run out of options to try......

03-23-2009, 09:24 AM	#10
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Upgrade drives on a 410 Is there a setting in the BIOS to reset to factory setting? With the null cable setup were you able to watch the complete boot process? If you have all of the orig hd's. Install them in the order they were removed. Setup a R5 then fail drive 1. May want to do a cold boot in between HD's. Install new let it rebuild once complete do the next and continue through the process till all have been replaced. The delete the R5 reboot, reboot then build a R5. I have run out of options to try...... __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820