Re: What do I have??
With NO HD install and you have access to the admin you have a 2000. With NO HD the unit will not even boot if a 2200 and will give a error code between the HD and sys leds.
The 2200 is a lower profile Black case and has a power pack. The 2000 uses a std power cable.
From the admin page you should beable to see what HD's are installed. Panic Alarms indicates somthing very wrong, in you case maybe NO HD.
If your 1000 unit is dead, you can try. Normally I do not recommend mixing hardware classes. The 1000 is the same class as a 2000. 1100's and 2200 are the odd ball units when it comes to SnapOS units. Mixing 1000 and 2200 may work provided it is setup for JBOD and is booting on the main HD, with the 1000 as a slave/second HD.
|