Pro/Forums - View Single Post

blue68f100 · 04-26-2010, 02:31 PM

The older snap units are pretty sensitive to timing. But users have used the SATA adapters, but the key is finding some good ones. Ask Phoenix32 on all the problems he ran into when it was working on his project for the 4500.

Just remember that the 2200 will only give you 12Mb/sec transfer speeds max for read, I think it's only 8.5 write. So if you start doing heavy work you will notice the speed.

04-26-2010, 02:31 PM	#4
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Should I upgrade or sell my Snap 2200? The older snap units are pretty sensitive to timing. But users have used the SATA adapters, but the key is finding some good ones. Ask Phoenix32 on all the problems he ran into when it was working on his project for the 4500. Just remember that the 2200 will only give you 12Mb/sec transfer speeds max for read, I think it's only 8.5 write. So if you start doing heavy work you will notice the speed. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820