Pro/Forums - View Single Post - Snap M4100 failde after battery replacement

blue68f100 · 11-27-2010, 12:20 PM

Check the log and see if it was running a check on the HD's. If so it will not mount the raid till it has finish. I have seen this take several days if the HD's are over 80% full. Every time you stop it it starts over.

After SpinRite let it run and check the log for progress.

You can only reset the password without blowing the other settings out. Need to see how many blinks are needed for this. I know it's not 4=full reset all.

11-27-2010, 12:20 PM	#8
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap M4100 failde after battery replacement Check the log and see if it was running a check on the HD's. If so it will not mount the raid till it has finish. I have seen this take several days if the HD's are over 80% full. Every time you stop it it starts over. After SpinRite let it run and check the log for progress. You can only reset the password without blowing the other settings out. Need to see how many blinks are needed for this. I know it's not 4=full reset all. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820