Pro/Forums - View Single Post

jtroutma · 06-25-2002, 12:09 AM

artemis0007:

I am using a Rio 1100 modded to run inline. Right now I have the support rail on the pump and the velcro is on the feet. What I am going to do is remove the rail and put some more velcor directly on the under side of my pump so it is lower and I dont have to worry about some velcro getting dirty. The rail is not wide enough to cover all the velcro

Works really well and I can pull my pump out at will and not have to worry about it when I move around my machine, like during the occasional LAN party!!!

ALso it does absorb the vibrations comming off the pump.

06-25-2002, 12:09 AM	#9
jtroutma Cooling Savant Join Date: Aug 2001 Location: SLO, CA Posts: 837	artemis0007: I am using a Rio 1100 modded to run inline. Right now I have the support rail on the pump and the velcro is on the feet. What I am going to do is remove the rail and put some more velcor directly on the under side of my pump so it is lower and I dont have to worry about some velcro getting dirty. The rail is not wide enough to cover all the velcro Works really well and I can pull my pump out at will and not have to worry about it when I move around my machine, like during the occasional LAN party!!! ALso it does absorb the vibrations comming off the pump. __________________ Athlon64 X2 4200+ @ 2.5Ghz (250FSB x 10) OCZ VX 1GB 4000 @ 250FSB (6-2-2-2 timmings) DFI LANParty nForce4 Ultra-D SCSI Raid 5 x (3) Cheetah 15K HDDs LSI Express 500 (128MB cache) OCZ PowerStream 520W PSU ATI X850XT PE (Stock) DTEK WhiteWater + DTEK Custom Radiator Eheim 1250