Pro/Forums - View Single Post

RahvinX · 10-02-2001, 06:46 PM

OK well i ordered a black ice 2 from overclock-watercool and fanbus and 4 fans from pcmods, along with a maze2 and all the trimmings(1250 ehiem) from danger den. So now i am to the design part. My case has several locations I can mount in, preferably on the front of the case. One question is how should i mount it so it will get good flow from the 2 120mm H1A panaflows I plan to use on it? I hear i should duct them, so i think nice an ghetto cardboard would work great (yay Kevin!) seems how my window is near the back of the case over the cards and CPU. Just how the *BEEP* and i gonna get the rad attached so the panaflows will mount well and the rad/and fans wont be out hanging in midair?

on the side i have to mount the pump too... i have space on the floor of the case, and up underneath the HDD in the HDD cage. I saw Una mount on the floor, but not a real detailed showing how it was done. Thoughts?

2X120mm's in from the front of the case, and a 60 out the back in the middle, an 80 at the top above the PSU fan, should i get another 80mm to blowhole out the top too? Yikes questions i have... ty for answering in advance. Haven't even thought about how to get the T to work yet :O

[ 10-02-2001: Message edited by: RahvinX ]

10-02-2001, 06:46 PM	#1
RahvinX Cooling Neophyte Join Date: May 2001 Posts: 3	Mounting a Black Ice 2 OK well i ordered a black ice 2 from overclock-watercool and fanbus and 4 fans from pcmods, along with a maze2 and all the trimmings(1250 ehiem) from danger den. So now i am to the design part. My case has several locations I can mount in, preferably on the front of the case. One question is how should i mount it so it will get good flow from the 2 120mm H1A panaflows I plan to use on it? I hear i should duct them, so i think nice an ghetto cardboard would work great (yay Kevin!) seems how my window is near the back of the case over the cards and CPU. Just how the BEEP and i gonna get the rad attached so the panaflows will mount well and the rad/and fans wont be out hanging in midair? on the side i have to mount the pump too... i have space on the floor of the case, and up underneath the HDD in the HDD cage. I saw Una mount on the floor, but not a real detailed showing how it was done. Thoughts? 2X120mm's in from the front of the case, and a 60 out the back in the middle, an 80 at the top above the PSU fan, should i get another 80mm to blowhole out the top too? Yikes questions i have... ty for answering in advance. Haven't even thought about how to get the T to work yet :O [ 10-02-2001: Message edited by: RahvinX ] __________________ T-Bird 1.2Ghz Asus A7V Geforce 3 220/530 320Mb PC-133 CAS2 250W PSU All the trimmings.