![]() | ||
|
|
General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums. |
![]() |
Thread Tools |
![]() |
#1 |
Cooling Neophyte
Join Date: May 2001
Posts: 3
|
![]()
OK well i ordered a black ice 2 from overclock-watercool and fanbus and 4 fans from pcmods, along with a maze2 and all the trimmings(1250 ehiem) from danger den. So now i am to the design part. My case has several locations I can mount in, preferably on the front of the case. One question is how should i mount it so it will get good flow from the 2 120mm H1A panaflows I plan to use on it? I hear i should duct them, so i think nice an ghetto cardboard would work great (yay Kevin!) seems how my window is near the back of the case over the cards and CPU. Just how the *BEEP* and i gonna get the rad attached so the panaflows will mount well and the rad/and fans wont be out hanging in midair?
on the side i have to mount the pump too... i have space on the floor of the case, and up underneath the HDD in the HDD cage. I saw Una mount on the floor, but not a real detailed showing how it was done. Thoughts? 2X120mm's in from the front of the case, and a 60 out the back in the middle, an 80 at the top above the PSU fan, should i get another 80mm to blowhole out the top too? Yikes questions i have... ty for answering in advance. Haven't even thought about how to get the T to work yet :O [ 10-02-2001: Message edited by: RahvinX ]
__________________
T-Bird 1.2Ghz Asus A7V Geforce 3 220/530 320Mb PC-133 CAS2 250W PSU All the trimmings. |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|