Made a few changes to the W/C tower
Revamped the hose routing and shrunk the res a bit.
I am now running the system
Res > Pump> Splitter Y >Blocks > Rad > Res
The main differences are the fact that each PC has its own Rad now and individual return line to res.
I eliminated both TEE blocks and several 90 degree bends, Made the "Y" block out of 1" thick Plexiglass.
Although I see no difference in temps or in flow rate, it had to of helped in some way, I just cant see a difference but that is not unusual as I really dont have the equipment to acurately test temp and flow.
I have come before you to ask your opinion on a mother board.
Since I managed to kill the old 800 processor, then killed the 1700+ replacement ( I believe I broke the M/B when I tightened the W/B down) Stupid 45 degree fitting
Well I have decided to upgrade my Gamer PC and use my 2000+ set up as the new server.
Thinking about getting an A-Bit AT7-MAX2 and a 2700+ 1 GD 400 DDR Corsair ram maybe the Barton set up if they become available soon.
I will keep the G Force 4 Ti 4600 Ultra card for video for now.
Any thoughts?
Aardil