Quote:
Originally posted by jaydee116
That extra metal might get in the way of mounting is the biggest concern. You will have to put it on the other side of the hump on the socket, but if the board has Caps it might hit them. Might give it a dry run real quick to see if it will need some modding. If it does it shouldn't be to hard to do.
If you put the block together check to see if the slot in the middle peice is in the center of the block. if it is then it isn't offset correctly. The guy who made that drawing new nothing of block design from what I can tell because of the obvious flaws in it. Still even with those flaws the block should still work fine if you get it mounted. Just make sure the fins are over the die at some point and you can't go to wrong. 
|
And once again correct JD!
The extra metal did get in the way... had to ask another friend to cut it!
AND it is offset! about 2 milimeters to the right
.
But hell, I'm rocking at 2600 MHZ @ 1.9 volts!
Heres some more pics
:
Chipset block finished:
Another one:
This is the piece that i made to fuel up the sistem, conect the WW exits, and Air-Trap All-In-One ( should i call it All-in-wonder thingy?
)
With the WW:
Spended quite some time building this PC, many times without my parents at home.
I still had to feed myself.
Here's the result:
If anyone wants the receip just PM me
SO, here it is, the finished product with 3/4 tubes, johnson pump, custom chipset and BAD cloned WW:
Yeap, johnson pump suks. It was already leaking, but i have already fixed it.
Hope you liked the final result.
PS: does this forums support animated gifs?
