PC-60 Pics

Shadco · 02-02-2003, 08:13 PM

It ain't pretty and it was a drag to build but...

1
2
3
4

Shad

Gnozo · 02-03-2003, 06:27 AM

Looks nice

Although you may need to clean up the wires a bit, it looks a little messy eh?

bigben2k · 02-03-2003, 08:40 AM

You can tidy it up some more: try to reduce the tugging on the hoses. Also, your airtrap/tee should be able to catch air, instead of letting it sit in the waterblock (you could try to raise it a bit).

Nice rig!

jtroutma · 02-03-2003, 02:18 PM

Nice setup.

I did notice one thing though. On the last pic that you have, I noticed that your +5V line is running below specs. Normal deviations on your +5V and your +12V lines should be 5% (4.75V - 5.25V for +5V). According to your picture, your currently running @ 4.57V. I would definately look into that. IF that reading is correct, you might want to seriously consider getting a new beefier PSU or figuring out why it is soo low.

Just a recommendation from a fellow forum member.

Shadco · 02-03-2003, 08:09 PM

Quote:

Originally posted by jtroutma
Nice setup.

I did notice one thing though. On the last pic that you have, I noticed that your +5V line is running below specs. Normal deviations on your +5V and your +12V lines should be 5% (4.75V - 5.25V for +5V). According to your picture, your currently running @ 4.57V. I would definately look into that. IF that reading is correct, you might want to seriously consider getting a new beefier PSU or figuring out why it is soo low.

Just a recommendation from a fellow forum member.

In the plans I'm surprised it runs that low. It's that low when checked with a vom too.

Shad

02-02-2003, 08:13 PM	#1
Shadco Cooling Neophyte Join Date: Jan 2003 Location: MD Posts: 7	PC-60 Pics It ain't pretty and it was a drag to build but... 1 2 3 4 Shad __________________ I knew where I was when I wrote this... I don't know where I am now. AT7 Max2, IT7, 8RDA+, 8RDA, A7N8X-D, KD7-r, Iwill MPX2.

02-03-2003, 06:27 AM	#2
Gnozo Cooling Savant Join Date: Apr 2002 Location: Denmark Posts: 105	Looks nice Although you may need to clean up the wires a bit, it looks a little messy eh? __________________ AMD XP1700+ @ JIUHB 12 x 202 Epox 8RDA+ Samsung PC2700 512mb Asus V8420 TI4200 Eheim 1048 - Maze1 - AirPlex EVO240 - Lian Li PC-61

02-03-2003, 08:40 AM	#3
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	You can tidy it up some more: try to reduce the tugging on the hoses. Also, your airtrap/tee should be able to catch air, instead of letting it sit in the waterblock (you could try to raise it a bit). Nice rig! __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

02-03-2003, 02:18 PM	#4
jtroutma Cooling Savant Join Date: Aug 2001 Location: SLO, CA Posts: 837	Nice setup. I did notice one thing though. On the last pic that you have, I noticed that your +5V line is running below specs. Normal deviations on your +5V and your +12V lines should be 5% (4.75V - 5.25V for +5V). According to your picture, your currently running @ 4.57V. I would definately look into that. IF that reading is correct, you might want to seriously consider getting a new beefier PSU or figuring out why it is soo low. Just a recommendation from a fellow forum member. __________________ Athlon64 X2 4200+ @ 2.5Ghz (250FSB x 10) OCZ VX 1GB 4000 @ 250FSB (6-2-2-2 timmings) DFI LANParty nForce4 Ultra-D SCSI Raid 5 x (3) Cheetah 15K HDDs LSI Express 500 (128MB cache) OCZ PowerStream 520W PSU ATI X850XT PE (Stock) DTEK WhiteWater + DTEK Custom Radiator Eheim 1250

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)