temp rise

crane · 05-31-2002, 11:58 AM

Going from a idle state to full CPU load, should my liquid cooled CPU temp rise slowly or should I expect an immediate temp increase? I'm thinking that the fast temp increase is due to an inefficent waterblock. Idle temps of 32c rising instantly to 45c under load.
I've never noticed this type of temp increase on my other watercooled machine using a OCH Z4 waterblock.

The system I'm wondering about uses a simple, homemade aluminum waterblock / Supreme magdrive 350gph / 7/16th hose /
custom radiator 6 pass/ 3 x 50mm fans.
MSI K7T Turbo Athlon 1.4 @ 1628 148x11 1.9v

Other system=
MSI K7T 266 Pro 2 XP 1700 @ default( piss poor overclocker)
Supreme 350 / OCH Z4 block/ 2 pass rad with 2 x 80mm fans

TonyM · 05-31-2002, 12:04 PM

Sounds a little bit like your wb isnt totally mounted properly. Try remounting it possibly.

crane · 05-31-2002, 12:59 PM

Well, I remounted the wb last night and killed my Athlon. No ,it didn't burn or crack....just wouldn't post. RMA 'd to AMD and picked up a 1.1 Duron to keep me entertained. Tried it on air and all is well, will put the wb on right now and check temps.

Brad · 05-31-2002, 03:29 PM

they should go up very quickly if you are using the internal diode, 45C does seem too high though

05-31-2002, 11:58 AM	#1
crane Cooling Neophyte Join Date: May 2002 Location: so cal Posts: 82	temp rise Going from a idle state to full CPU load, should my liquid cooled CPU temp rise slowly or should I expect an immediate temp increase? I'm thinking that the fast temp increase is due to an inefficent waterblock. Idle temps of 32c rising instantly to 45c under load. I've never noticed this type of temp increase on my other watercooled machine using a OCH Z4 waterblock. The system I'm wondering about uses a simple, homemade aluminum waterblock / Supreme magdrive 350gph / 7/16th hose / custom radiator 6 pass/ 3 x 50mm fans. MSI K7T Turbo Athlon 1.4 @ 1628 148x11 1.9v Other system= MSI K7T 266 Pro 2 XP 1700 @ default( piss poor overclocker) Supreme 350 / OCH Z4 block/ 2 pass rad with 2 x 80mm fans __________________ dirt rules

05-31-2002, 12:59 PM	#3
crane Cooling Neophyte Join Date: May 2002 Location: so cal Posts: 82	Well, I remounted the wb last night and killed my Athlon. No ,it didn't burn or crack....just wouldn't post. RMA 'd to AMD and picked up a 1.1 Duron to keep me entertained. Tried it on air and all is well, will put the wb on right now and check temps. __________________ dirt rules

05-31-2002, 03:29 PM	#4
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	they should go up very quickly if you are using the internal diode, 45C does seem too high though __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

05-31-2002, 12:04 PM	#2
TonyM Cooling Neophyte Join Date: Mar 2002 Location: Mount Prospect Posts: 78	Sounds a little bit like your wb isnt totally mounted properly. Try remounting it possibly.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)