New Geforce4 block from DD

UpAllNight · 06-04-2002, 10:40 AM

looks like they have addressed the flow problems by using 45 deg. barbs...but u may run into some ramsink problems

what do u guys think of it

wouldnt u know they would come out with this right after i bought my geforce3 block

http://www.dangerden.com/images/GF4/gf4.htm

Cyco-Dude · 06-04-2002, 11:31 AM

yeah, i just saw that today lol. if its used w/ a GF3, then there might be issues (they say it doesnt work with the Asus cards unless you mod the RAMsinks). but otherwise, the tweakmonster BGA RAMsinks should be fine. just be careful taking the stock sinks off; several ppl have ripped their RAM chips off with the RAMsinks lol

Brad · 06-04-2002, 01:50 PM

notice how the outlet is in the middle of the ram modules, not over any of them. most heatsinks would be missed with that setup,

UpAllNight · 06-04-2002, 01:57 PM

yeah i saw that...but its gona be close on some cards i dont think it would clear on my gainward and its got some short heat sinks on it..at lest with 3/4 od tubing

WebMasta33 · 06-04-2002, 07:26 PM

A week and a half after I get my DD GeForce cooler....

EDIT: heh, guess I should note the GeForce4 part... and that it's not for a GeForce3.. which is what I assumed, whoops

Cyco-Dude · 06-04-2002, 08:21 PM

it'll work on GF3 also, you gotta read more carefully lol.

"A week and a half after I get my DD GeForce cooler..."
yeah, thats what happened when i ordered my Maze 2, a week later and the M3 is for sale lol.

max007007 · 06-05-2002, 12:11 AM

When will it be available?
Hope their northbridge wb will be this type of design too.

06-04-2002, 10:40 AM	#1
UpAllNight Cooling Savant Join Date: Apr 2002 Location: HILLBILLY LAND Posts: 159	New Geforce4 block from DD looks like they have addressed the flow problems by using 45 deg. barbs...but u may run into some ramsink problems what do u guys think of it wouldnt u know they would come out with this right after i bought my geforce3 block http://www.dangerden.com/images/GF4/gf4.htm __________________ XP1800 @172x10.5 Maze 3..Ehiem 1250..Chevette Rad 1 120mm panaflo @7v 1" shroud All fits nicely inside my case ambient(74 F) 2.0v Core(33.5) Loaded idle(31.5c) Enermax 431 watt Antec 1030B Gainward Geforce 3 TI200 241/548 Sony CDRW Creative 52x CD Soundblaster Live Last edited by UpAllNight; 06-04-2002 at 10:42 AM.

06-04-2002, 01:50 PM	#3
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	notice how the outlet is in the middle of the ram modules, not over any of them. most heatsinks would be missed with that setup, __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

06-04-2002, 01:57 PM	#4
UpAllNight Cooling Savant Join Date: Apr 2002 Location: HILLBILLY LAND Posts: 159	yeah i saw that...but its gona be close on some cards i dont think it would clear on my gainward and its got some short heat sinks on it..at lest with 3/4 od tubing __________________ XP1800 @172x10.5 Maze 3..Ehiem 1250..Chevette Rad 1 120mm panaflo @7v 1" shroud All fits nicely inside my case ambient(74 F) 2.0v Core(33.5) Loaded idle(31.5c) Enermax 431 watt Antec 1030B Gainward Geforce 3 TI200 241/548 Sony CDRW Creative 52x CD Soundblaster Live

06-04-2002, 07:26 PM	#5
WebMasta33 Cooling Savant Join Date: Dec 2001 Location: Nebraska Posts: 526	A week and a half after I get my DD GeForce cooler.... EDIT: heh, guess I should note the GeForce4 part... and that it's not for a GeForce3.. which is what I assumed, whoops __________________ ========== --Soyo KT333 DRAGON Ultra (Platinum Edition) --AMD 1.4 @ 1.54 (11x) --768mb of PC2100 (@140FSB) --Asus v8200 GeForce3 @ 210/490 --Maxtor 40gb Quiet + 2 IBM 40gb 60GXPs (removable) + 8gb WD --Audigy --Maze 3, DD Gf3 block, 2x BIX, Eheim1250 ===========

06-05-2002, 12:11 AM	#7
max007007 Cooling Neophyte Join Date: Apr 2002 Location: Singapore Posts: 61	When will it be available? Hope their northbridge wb will be this type of design too. __________________ My Specs http://homex.coolconnect.com/member3...ages/Specs.jpg

06-04-2002, 11:31 AM	#2
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	yeah, i just saw that today lol. if its used w/ a GF3, then there might be issues (they say it doesnt work with the Asus cards unless you mod the RAMsinks). but otherwise, the tweakmonster BGA RAMsinks should be fine. just be careful taking the stock sinks off; several ppl have ripped their RAM chips off with the RAMsinks lol

06-04-2002, 08:21 PM	#6
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	it'll work on GF3 also, you gotta read more carefully lol. "A week and a half after I get my DD GeForce cooler..." yeah, thats what happened when i ordered my Maze 2, a week later and the M3 is for sale lol.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)