Finished Heatercore mod.

terabyte · 10-20-2001, 06:43 PM

I got my heatercore this week from AutoZone for $24 and change. Well here is my progess. I still want clean the extra JB Weld off the pipes and paint all the edges but that will have to wait till the JB Weld has cured.

Hacked off first pipe and cleaned it up a bit. Extra piece on top for comparison.

Liberal appilcation of JB Weld around the part of the hose bard that is going in the pipe.

5 Minutes in the oven to harden a bit of the JB Weld in the second pipe. I needed to do it into two parts because I needed a bunch of JB Weld. This idea I stole right off Procooling.com

Both fitings done!

How do you think this setup with Dual Panaflo H1A's will cool a couple of pelts? HAH HAH AH

[ 10-20-2001: Message edited by: terabyte ]

LiquidCool · 10-20-2001, 08:28 PM

COPYCAT :P

UnaClocker · 10-20-2001, 10:50 PM

Very cool, wish I had gotten a radiator that big, mine's JUST a hair too small for a pair of 120's.. But it does do a pair of 92's nicely..

terabyte · 10-21-2001, 02:05 AM

heh heh You know it Micheal

Una remember you could fit a couple of 120's on anything just shroud it.

Kevin · 10-21-2001, 03:06 AM

Looks nice! A lot like mine. I like it!

resago · 10-21-2001, 07:35 PM

So what vehicle was that heater core made for?

Mumrik · 10-21-2001, 08:52 PM

Quote:

Originally posted by Michael Huck:
COPYCAT :P

Poor mans Leviathan?

Jonas · 10-21-2001, 11:15 PM

i got my leviathan in, and i am now considering a shroud...is it really needed or should i not bother? i see you mounted direct to the rad, aren't you at all worried about the dead spots? or is this size big enough to just not care? would certainly speed things along if i just forget the shroud...

LiquidCool · 10-22-2001, 12:48 AM

hehe pretty much

terabyte · 10-22-2001, 08:35 AM

Quote:

Originally posted by resago:
So what vehicle was that heater core made for?

I belive 1970 Caprice. Not sure because I just went to AutoZone, told them what it was for and they were so perplexed the guy came with me help me open boxes as we looked at them one by one with two cd's in hand for sizing.

Quote:

Originally posted by Jonas:
i got my leviathan in, and i am now considering a shroud...is it really needed or should i not bother? i see you mounted direct to the rad, aren't you at all worried about the dead spots? or is this size big enough to just not care? would certainly speed things along if i just forget the shroud...

I will be making a shroud this was just for scale. You can see that the two 120's fit perfectly. Probably just make another shroud like I did last time, fiberglassed cardboard. Light and strong ohh yeah.

BaconGrease · 10-22-2001, 01:55 PM

sweet,
by the way your desk is a mess

decodeddiesel · 10-22-2001, 03:53 PM

Damn I shoulda come over here long ago...

Well I said it at the [H] and I'll say it here, that thing is sweet with those dual 120mm's on it

terabyte · 10-22-2001, 04:45 PM

I know it's actually just for my project and I might clean it some day.

Both of you guy's thanks for the comments.

I started to mod my case yesterday I'll try to get pics up tonight. This is going to be the sweetest SuperMicro SC750 you have ever seen when I'm done.

WaterPog · 10-22-2001, 05:07 PM

I need to get those pics of my setup uploaded so I can show off...

Mumrik · 10-22-2001, 05:58 PM

Quote:

Originally posted by decodeddiesel:
Damn I shoulda come over here long ago...

Well I said it at the [H] and I'll say it here, that thing is sweet with those dual 120mm's on it

True, you actually belong here

Tweekster · 10-22-2001, 09:01 PM

What is the Autozone part number on your core? It would help out several of us.....thanks

terabyte · 10-23-2001, 08:18 AM

if I could get into Hardforums I'll let you know the part number. If not I'll look it up when I get home.

Is anyone else having trouble getting into hardforums?

terabyte · 10-23-2001, 10:53 AM

Autozone Part Number: 398219

LiquidCool · 10-23-2001, 11:28 AM

heheh, that IS the same one!

Mumrik · 10-23-2001, 06:59 PM

Now we know how much money you make on these

Kevin · 10-23-2001, 07:58 PM

That's business baby!

Quote:

Originally posted by Mumrik:
Now we know how much money you make on these

terabyte · 10-23-2001, 08:05 PM

in all fairness he doesn't make that much... I think that the mounting tabs are added by him.. the hose bard and jb weld came out to 7 buck and he spray paints it a hammer finish for you.

BAHHHH I still rather do it myself.

LiquidCool · 10-24-2001, 03:45 AM

Trust me it aint that much

LV_DiceDealer · 10-24-2001, 04:40 AM

Quote:

Originally posted by decodeddiesel:
Damn I shoulda come over here long ago...

Well I said it at the [H] and I'll say it here, that thing is sweet with those dual 120mm's on it

deco -- Nice to ya here

Kevin · 10-24-2001, 05:41 AM

Quote:

Originally posted by terabyte:
This idea I stole right off Procooling.com

Was that me you stole it from or someone else? just wondering, but kinda curious
-Kev

10-20-2001, 06:43 PM	#1
terabyte Cooling Neophyte Join Date: Mar 2001 Posts: 44	Finished Heatercore mod. I got my heatercore this week from AutoZone for $24 and change. Well here is my progess. I still want clean the extra JB Weld off the pipes and paint all the edges but that will have to wait till the JB Weld has cured. Hacked off first pipe and cleaned it up a bit. Extra piece on top for comparison. Liberal appilcation of JB Weld around the part of the hose bard that is going in the pipe. 5 Minutes in the oven to harden a bit of the JB Weld in the second pipe. I needed to do it into two parts because I needed a bunch of JB Weld. This idea I stole right off Procooling.com Both fitings done! How do you think this setup with Dual Panaflo H1A's will cool a couple of pelts? HAH HAH AH [ 10-20-2001: Message edited by: terabyte ]

10-20-2001, 10:50 PM	#3
UnaClocker Cooling Savant Join Date: Apr 2000 Location: Bremerton, WA Posts: 514	Very cool, wish I had gotten a radiator that big, mine's JUST a hair too small for a pair of 120's.. But it does do a pair of 92's nicely.. __________________ The UnaClocker Watercooler Extraordinaire! Overclock till it goes BOOM!

10-21-2001, 03:06 AM	#5
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	Looks nice! A lot like mine. I like it! __________________ I used to throw hot coffee all over the ass of the horse there, then whip him while he was kickin' at me. Those f***in things are crazy.

10-21-2001, 07:35 PM	#6
resago Cooling Savant Join Date: Mar 2001 Location: state of denial Posts: 488	So what vehicle was that heater core made for? __________________ 2.4Ghz Compaq Workstation 2.8Ghz Custom 2700+ Custom still running 2000!!!! Help with Coding www.resago.com

10-21-2001, 11:15 PM	#8
Jonas Cooling Neophyte Join Date: Nov 2000 Location: Jackson, MI Posts: 94	i got my leviathan in, and i am now considering a shroud...is it really needed or should i not bother? i see you mounted direct to the rad, aren't you at all worried about the dead spots? or is this size big enough to just not care? would certainly speed things along if i just forget the shroud... __________________ "...as soon as you're born you start dying; so you might as well have a good time..."

10-20-2001, 08:28 PM	#2
LiquidCool Cooling Savant Join Date: Apr 2001 Location: Central Florida Posts: 231	COPYCAT :P

10-21-2001, 02:05 AM	#4
terabyte Cooling Neophyte Join Date: Mar 2001 Posts: 44	heh heh You know it Micheal Una remember you could fit a couple of 120's on anything just shroud it.

10-22-2001, 12:48 AM	#9
LiquidCool Cooling Savant Join Date: Apr 2001 Location: Central Florida Posts: 231	hehe pretty much

10-22-2001, 01:55 PM	#11
BaconGrease Cooling Neophyte Join Date: Dec 2000 Location: Richmond Posts: 85	sweet, by the way your desk is a mess __________________ Damn that is hot

10-22-2001, 03:53 PM	#12
decodeddiesel Cooling Savant Join Date: Oct 2001 Location: classified Posts: 534	Damn I shoulda come over here long ago... Well I said it at the [H] and I'll say it here, that thing is sweet with those dual 120mm's on it __________________ ...i hurt... do me a favor, disconect me... they can re-work me but i'll never be top of the line again ...i'd rather be nothing...

10-22-2001, 04:45 PM	#13
terabyte Cooling Neophyte Join Date: Mar 2001 Posts: 44	I know it's actually just for my project and I might clean it some day. Both of you guy's thanks for the comments. I started to mod my case yesterday I'll try to get pics up tonight. This is going to be the sweetest SuperMicro SC750 you have ever seen when I'm done.

10-22-2001, 05:07 PM	#14
WaterPog Cooling Neophyte Join Date: Jul 2001 Location: Portland, OR Posts: 50	I need to get those pics of my setup uploaded so I can show off... __________________ 1.4G AHYJA-Y @ 1.6G with H2O system. Ehime 1060, LiquidCool leviathan, Spir@l Block, all 1/2" It will post at 1725, that is where I want it to be stable....

10-22-2001, 09:01 PM	#16
Tweekster Cooling Neophyte Join Date: Oct 2001 Location: The Rockies Posts: 31	What is the Autozone part number on your core? It would help out several of us.....thanks __________________ Dual 2400MP \| Dual 2.4 Xeon

10-23-2001, 08:18 AM	#17
terabyte Cooling Neophyte Join Date: Mar 2001 Posts: 44	if I could get into Hardforums I'll let you know the part number. If not I'll look it up when I get home. Is anyone else having trouble getting into hardforums?

10-23-2001, 10:53 AM	#18
terabyte Cooling Neophyte Join Date: Mar 2001 Posts: 44	Autozone Part Number: 398219

10-23-2001, 11:28 AM	#19
LiquidCool Cooling Savant Join Date: Apr 2001 Location: Central Florida Posts: 231	heheh, that IS the same one!

10-23-2001, 06:59 PM	#20
Mumrik Cooling Neophyte Join Date: Jul 2001 Location: Denmark Posts: 39	Now we know how much money you make on these

10-23-2001, 08:05 PM	#22
terabyte Cooling Neophyte Join Date: Mar 2001 Posts: 44	in all fairness he doesn't make that much... I think that the mounting tabs are added by him.. the hose bard and jb weld came out to 7 buck and he spray paints it a hammer finish for you. BAHHHH I still rather do it myself.

10-24-2001, 03:45 AM	#23
LiquidCool Cooling Savant Join Date: Apr 2001 Location: Central Florida Posts: 231	Trust me it aint that much

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)