Fittings for Danner Mag

AllRoy · 10-27-2001, 09:14 AM

If I am going to run a Danner Mag submerged, does anyone know about how far the fittings extend out from the exit of the pump? I am just trying to see if it will fit in my res! Thanks!

Def · 10-27-2001, 12:59 PM

If it is submerged, you should only need a fitting on the exit side. This is the top hole on the impeller housing. For mine, the fitting extends about 1 3/4" up since I could not thread it on all the way.

As for fitting in your resivoir, wouldn't you want the exit fitting accessible on the outside to connect a hose to it?

BrianW · 10-28-2001, 12:45 PM

the only res it will fit in is a 6X6X4 res

tried it and it barely fits....

you have to mount it sideways in there w/ a 90 degree plumbing fitting.

it is very tight and will add heat to the system.

that is y i decided not to go ahead w/ it.

10-27-2001, 09:14 AM	#1
AllRoy Cooling Neophyte Join Date: Sep 2001 Location: Miami, FL Posts: 67	Fittings for Danner Mag If I am going to run a Danner Mag submerged, does anyone know about how far the fittings extend out from the exit of the pump? I am just trying to see if it will fit in my res! Thanks!

10-27-2001, 12:59 PM	#2
Def Cooling Neophyte Join Date: Jul 2001 Posts: 14	If it is submerged, you should only need a fitting on the exit side. This is the top hole on the impeller housing. For mine, the fitting extends about 1 3/4" up since I could not thread it on all the way. As for fitting in your resivoir, wouldn't you want the exit fitting accessible on the outside to connect a hose to it? __________________ ---lurking semi-n00b---

10-28-2001, 12:45 PM	#3
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	the only res it will fit in is a 6X6X4 res tried it and it barely fits.... you have to mount it sideways in there w/ a 90 degree plumbing fitting. it is very tight and will add heat to the system. that is y i decided not to go ahead w/ it. __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)