!!! Waterblock !!!

R4pToR · 01-27-2003, 11:18 AM

Hi Guys! I am building a waterblock for me, and dont know which and best desing, someone can help me? I exactly wanted to make an equal one to the white to river.

Sorry my English! =)

winewood · 01-27-2003, 03:10 PM

It sounds like you are talking about http://forums.procooling.com/vbb/sho...8787#post58787 This is a very effective design. I suggest you find out if he is releasing schematics of his block and use them. Why reinvent the wheel if you are just starting?

bigben2k · 01-27-2003, 03:15 PM

I'd recomend this one by Morphling1, because it's relatively easy to make.

If you want a challenging design, look at this one.

R4pToR · 01-27-2003, 05:25 PM

But there is a big diference for the Morphling1 block to the whit river ??? how many ???
With a volcano 6CU+ Mod ( fan more slow and laped ) i put my tbred b 1700+ a 2125Mhz 52full load whit this waterblock the temp is gonna by near 35Full right ??? Here in the brazil is very hot, the temp is near 42 in summer !

bigben2k · 01-27-2003, 05:35 PM

If you can afford to import the White water block, all the way from Australia, go for it.

If you want to make your own, you should make a list of the tools that you have, and a list of the tools that you are willing to get.

Make no mistake: this is not something that is actually worth doing, money wise. You should set a limit on how much you are willing to spend.

A very easy one to make is the #Rotor style block, and the performance is actually nice!

As for the temperature in your part of the world, I can't help you there! What I can tell you is that you can expect your CPU to be x degrees above your room air temperature, where x depends on the design.

ricc · 01-27-2003, 07:39 PM

e ai raptor blz veio, eh nois

R4pToR · 01-27-2003, 08:32 PM

cole ricc!
eh nois ! braziL rulez a lot !

-J- · 01-27-2003, 11:34 PM

r4ptor, this is my desing im actually building now.

is quite simple, and cheap. easy to make too.

take a look here

any question, just look for me on icq.

R4pToR · 01-28-2003, 03:09 PM

Wich block is beter ???
Morphling1 or -J- ????

R4pToR · 01-29-2003, 08:09 AM

I Will do the White River Clone
But i need the Size of it, the holds...
Any one can send me this ????

uP!

-J- · 01-30-2003, 01:35 AM

im sure morphling's is way better than mine.

mine is more easy to make. you need few tools. no mill or heavy stuff like that.

01-27-2003, 11:18 AM	#1
R4pToR Cooling Neophyte Join Date: Jan 2003 Location: Brazil Posts: 16	!!! Waterblock !!! Hi Guys! I am building a waterblock for me, and dont know which and best desing, someone can help me? I exactly wanted to make an equal one to the white to river. Sorry my English! =)

01-27-2003, 03:10 PM	#2
winewood Cooling Savant Join Date: Nov 2002 Location: in my chair Posts: 574	It sounds like you are talking about http://forums.procooling.com/vbb/sho...8787#post58787 This is a very effective design. I suggest you find out if he is releasing schematics of his block and use them. Why reinvent the wheel if you are just starting? __________________ -winewood-

01-27-2003, 03:15 PM	#3
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	I'd recomend this one by Morphling1, because it's relatively easy to make. If you want a challenging design, look at this one. __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

01-27-2003, 05:35 PM	#5
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	If you can afford to import the White water block, all the way from Australia, go for it. If you want to make your own, you should make a list of the tools that you have, and a list of the tools that you are willing to get. Make no mistake: this is not something that is actually worth doing, money wise. You should set a limit on how much you are willing to spend. A very easy one to make is the #Rotor style block, and the performance is actually nice! As for the temperature in your part of the world, I can't help you there! What I can tell you is that you can expect your CPU to be x degrees above your room air temperature, where x depends on the design. __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

01-27-2003, 07:39 PM	#6
ricc Cooling Neophyte Join Date: Dec 2002 Location: Itajaí/SC - Brazil Posts: 8	e ai raptor blz veio, eh nois __________________ Abit NF7-S v2.0 (BIOS 1.0) Tbred B 1700+ JIUHB@1?x2?? (1.??v) Extreme Watercooled by RadiatorF1&Innovaclone rev0.1 waterblock 1x256 DDR433 PC3500 PSU Delta DPS-300GB-A REV2 300w +PFC

01-27-2003, 05:25 PM	#4
R4pToR Cooling Neophyte Join Date: Jan 2003 Location: Brazil Posts: 16	But there is a big diference for the Morphling1 block to the whit river ??? how many ??? With a volcano 6CU+ Mod ( fan more slow and laped ) i put my tbred b 1700+ a 2125Mhz 52full load whit this waterblock the temp is gonna by near 35Full right ??? Here in the brazil is very hot, the temp is near 42 in summer !

01-27-2003, 08:32 PM	#7
R4pToR Cooling Neophyte Join Date: Jan 2003 Location: Brazil Posts: 16	cole ricc! eh nois ! braziL rulez a lot !

01-27-2003, 11:34 PM	#8
-J- Registered User Join Date: Dec 2002 Location: Buenos Aires, Argentina Posts: 217	r4ptor, this is my desing im actually building now. is quite simple, and cheap. easy to make too. take a look here any question, just look for me on icq.

01-28-2003, 03:09 PM	#9
R4pToR Cooling Neophyte Join Date: Jan 2003 Location: Brazil Posts: 16	Wich block is beter ??? Morphling1 or -J- ????

01-29-2003, 08:09 AM	#10
R4pToR Cooling Neophyte Join Date: Jan 2003 Location: Brazil Posts: 16	I Will do the White River Clone But i need the Size of it, the holds... Any one can send me this ???? uP!

01-30-2003, 01:35 AM	#11
-J- Registered User Join Date: Dec 2002 Location: Buenos Aires, Argentina Posts: 217	im sure morphling's is way better than mine. mine is more easy to make. you need few tools. no mill or heavy stuff like that.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)