 | ||
|
||
|
|||||||
| Water Block Design / Construction Building your own block? Need info on designing one? Heres where to do it |
 |
| Thread Tools |
08-07-2006, 08:29 PM
|
#1 |
|
Cooling Neophyte
Join Date: Mar 2006
Location: ca
Posts: 24
|
well onto the cpu block
i made a gpu block for my 6800 gt...now i wanna make the cpu block....got a nice over clock on the 6800gt btw 460mhz 1300 on the ram stock was 350 1000....any ideas on cpu design?...i'm using 3/8" copper flat stock and 1" thick UHMW for the top...just looking for clews on how to mill the inside of the copper for a 939 proc...i can use the standard drill dremel...but i think i want kind hell i dunno gimme some suggestions please!
|
|
|
|
08-07-2006, 11:17 PM
|
#2 |
|
Cooling Neophyte
Join Date: Mar 2006
Location: ca
Posts: 24
|
Re: well onto the cpu block
i guess it's all faded out lol well imma take a pice of what i got and upload it in a few...i dont wait around to do stuff much =\ i got 130 holes in the block lol....ehh yea...so i guess all the flow is gonna come from the top then into the holes...one side will be restricted flow one side full flow...hope it works out good. if not i have to go buy some more copper =\
|
|
|
|
|
08-07-2006, 11:24 PM
|
#3 |
|
Put up or Shut Up
Join Date: Dec 2001
Location: Spokane WA
Posts: 6,506
|
Re: well onto the cpu block
I was happy with it. http://www.procooling.com/index.php?...icles&disp=128
|
|
|
|
|
08-07-2006, 11:48 PM
|
#4 |
|
Cooling Neophyte
Join Date: Mar 2006
Location: ca
Posts: 24
|
Re: well onto the cpu block
not exactly what i got goin here...lol let me upload some pics...
   
Last edited by pepshki; 08-08-2006 at 12:00 AM. |
|
|
|
|
08-07-2006, 11:54 PM
|
#5 |
|
Cooling Neophyte
Join Date: Mar 2006
Location: ca
Posts: 24
|
Re: well onto the cpu block
it's so shiny i think it did a good lapping job on it.... went 2000 grit with mothers to soften the copper while lapping...
|
|
|
|
|
08-08-2006, 12:42 AM
|
#6 |
|
Cooling Neophyte
Join Date: Jun 2005
Location: Blue Ridge Mountains
Posts: 44
|
Re: well onto the cpu block
very nice
__________________
Electronics are prefilled with factory smoke--if the smoke gets out they stop working--So Don't Let The Smoke Out! |
|
|
|
|
08-08-2006, 01:13 AM
|
#7 |
|
Cooling Neophyte
Join Date: Mar 2006
Location: ca
Posts: 24
|
Re: well onto the cpu block
well i guess this is the finished product...
  
|
|
|
|
|
08-08-2006, 01:49 AM
|
#8 |
|
Cooling Neophyte
Join Date: Mar 2006
Location: ca
Posts: 24
|
Re: well onto the cpu block
i think i need a better pump....this block is reducing my flow alot! only a 32 gph pump though...
|
|
|
|
|
08-08-2006, 03:27 AM
|
#9 |
|
Cooling Neophyte
Join Date: Mar 2006
Location: ca
Posts: 24
|
Re: well onto the cpu block
i don't think i am getting a very good temp on this....it's groin from my cpu block to the gpu block....then back through the loop with a heater core....cpu temp is 38 c its an athlon 64 3000+ at 2.4 ghz so 600 mhz oc and the gpu block is 48c is this good or bad? this is my first water cooling setup and i made everything from scratch...so i have no clew what kind of temps to expect....and its a 32gph 12v electric fuel pump...*sigh* i jsut dont know i think my cpu was running cooler with the heat pipe heat sink i had on it from cooler master but i dont remember the temps=......i'm basing these temps off of asus probe though i dont know how accurate that is.
Last edited by pepshki; 08-08-2006 at 03:41 AM. |
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
All times are GMT -5. The time now is 10:04 PM.