looking for a 366@550

Feable · 11-29-2000, 09:47 PM

In need of a socket 370 celeron 366 that will run solid at 550. If its not solid at 550 I really cant use. Its going in my dads machine so it cant be finicky. thanks

dsk4 · 11-29-2000, 10:33 PM

http://www.gamingin3d.com/forum/show...p?threadid=906

------------------
dsk4, master of the obvious

[This message has been edited by dsk4 (edited 11-29-2000).]

slag · 11-29-2000, 11:03 PM

I have a 366 that does 550 at stock voltage and will do up to 566 mhz with .1 voltage increase. I have been running it at 566 mhz since hmm, last christmas?

With a decent enough price, I might be able to get a faster celeron..

Joe

Rhombuss · 11-30-2000, 12:04 AM

I have a Celeron PPGA 400@600 stable at 2.15V with a gorb. I'll sell the CPU with the retail box still with stock HSF for $50 shipped. I'll throw in an MSI slocket for an additional $5 if you need it.

LMK

Thanks!

------------------
-Rhombuss

Feable · 11-30-2000, 06:30 AM

Hey slag,
I'll swap ya the 366 for a stable 533@600 at stock voltage. that will give you a bump and me a second 550 for a duely bord for my dad. Interested?

slag · 11-30-2000, 08:18 AM

Sounds good. I would like to keep my existing heatsink/fan (assuming the older celerons like mine and the newer ones like yours both use the same heatsinks). I don't think my slocket adapter will work with newer celerons though so I would probably want to trade that so the exact trade would be processor and slocket for processor and slocket assuming you have a slocket and are not putting these on a bp6 motherboard.
If you dont need a slocket, then no biggie.
Let me know how this sounds. The slocket I have lets you adjust fsb and voltage. I think its an Iwill

Feable · 11-30-2000, 10:19 PM

done deal bud.
that 366 is a socket 370? right?
the 533 is a socket 370, it is not a new style (fcppga) its a ppga so just swapping the chips is all we need to do.IF this is acceptable we will just swap-em out

slag · 12-01-2000, 07:14 AM

yep, sounds good.
It is a socket 370.

Since you are running it at a 75 mhz bus, I take it that it wont work at a 100 mhz bus?

Email me @ slagdemon@hotmail.com

Thanks

[This message has been edited by slag (edited 12-01-2000).]

11-29-2000, 09:47 PM	#1
Feable Cooling Neophyte Join Date: Nov 2000 Location: Tampa Posts: 31	looking for a 366@550 In need of a socket 370 celeron 366 that will run solid at 550. If its not solid at 550 I really cant use. Its going in my dads machine so it cant be finicky. thanks

11-29-2000, 10:33 PM	#2
dsk4 Cooling Neophyte Join Date: Nov 2000 Location: seattle, wa Posts: 13	http://www.gamingin3d.com/forum/show...p?threadid=906 ------------------ dsk4, master of the obvious [This message has been edited by dsk4 (edited 11-29-2000).]

11-29-2000, 11:03 PM	#3
slag Cooling Neophyte Join Date: Nov 2000 Location: lawrence, Kansas, USA Posts: 10	I have a 366 that does 550 at stock voltage and will do up to 566 mhz with .1 voltage increase. I have been running it at 566 mhz since hmm, last christmas? With a decent enough price, I might be able to get a faster celeron.. Joe

11-30-2000, 12:04 AM	#4
Rhombuss Cooling Neophyte Join Date: Nov 2000 Location: Toronto, Ontario, Canada Posts: 13	I have a Celeron PPGA 400@600 stable at 2.15V with a gorb. I'll sell the CPU with the retail box still with stock HSF for $50 shipped. I'll throw in an MSI slocket for an additional $5 if you need it. LMK Thanks! ------------------ -Rhombuss

11-30-2000, 06:30 AM	#5
Feable Cooling Neophyte Join Date: Nov 2000 Location: Tampa Posts: 31	Hey slag, I'll swap ya the 366 for a stable 533@600 at stock voltage. that will give you a bump and me a second 550 for a duely bord for my dad. Interested?

11-30-2000, 08:18 AM	#6
slag Cooling Neophyte Join Date: Nov 2000 Location: lawrence, Kansas, USA Posts: 10	Sounds good. I would like to keep my existing heatsink/fan (assuming the older celerons like mine and the newer ones like yours both use the same heatsinks). I don't think my slocket adapter will work with newer celerons though so I would probably want to trade that so the exact trade would be processor and slocket for processor and slocket assuming you have a slocket and are not putting these on a bp6 motherboard. If you dont need a slocket, then no biggie. Let me know how this sounds. The slocket I have lets you adjust fsb and voltage. I think its an Iwill

11-30-2000, 10:19 PM	#7
Feable Cooling Neophyte Join Date: Nov 2000 Location: Tampa Posts: 31	done deal bud. that 366 is a socket 370? right? the 533 is a socket 370, it is not a new style (fcppga) its a ppga so just swapping the chips is all we need to do.IF this is acceptable we will just swap-em out

12-01-2000, 07:14 AM	#8
slag Cooling Neophyte Join Date: Nov 2000 Location: lawrence, Kansas, USA Posts: 10	yep, sounds good. It is a socket 370. Since you are running it at a 75 mhz bus, I take it that it wont work at a 100 mhz bus? Email me @ slagdemon@hotmail.com Thanks [This message has been edited by slag (edited 12-01-2000).]

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)