Tons of pictures of my new watersetup!!

Zultan · 05-02-2002, 05:57 AM

http://home.broadpark.no/~whage/

The website is in norwegian, but you can take a look at all the cool pictures of my rig anyway. use the link "fotogalleri" to view only pictures.
I submitted a picture here so u can preview my homemade waterblock.
Maybe i'll write it in english later (if i'm able to....) HAHAHA
Anyway, write a comment in my guestbook ("gjestebok") if u want to.

My CPU-temp is ca 35 degrees C. AMD athlon 1400@1600

Zultan

UnaClocker · 05-02-2002, 08:27 AM

Looks good, is that vinyl or tygon?

Cyco-Dude · 05-02-2002, 08:39 AM

thats a big heatercore! i wouldve used two fans to cool it instead of one tho...

lol, mounting the hdds w/ rubber bands and broken pencils, classic

Jim · 05-02-2002, 09:54 AM

Quote:

Originally posted by Cyco-Dude
thats a big heatercore! i wouldve used two fans to cool it instead of one tho...

lol, mounting the hdds w/ rubber bands and broken pencils, classic

Zultan-

Must be a really old CPU it has a key to wind it UP! LOL

The"key" thing in the center of the block must be part of the hold down yes, how about more info on your water block?

Jim

Hellion_Prime · 05-02-2002, 11:35 AM

What is that heatercore off of, anyway?

--HP

Razor6 · 05-03-2002, 12:00 AM

That heater core looks like the one I bought. Common core #2-199, GDI part #39-8219, paid 15.99 at O'Reillys. Listed as 9 1/2" X 6 1/8"

Brad · 05-03-2002, 04:33 AM

do you guys have power over there or do you wind up your cpu's? :P

I love the pencils and zip tie, I can't stop laughing

apart from that, very nice

Zultan · 05-03-2002, 05:08 AM

The heatercore is from an opel rekord 79-model. The intake/outlet was not like your drawing, but came out on the side of it, so i hade to cut off , make new holes, and solder in the front.
I paid about 15 bucks for it from a scrapyard.(and Norway is an expensive country, i'll promise u!!

The mounting for the waterblock is made of plexi.It's mounted in the 4 holes in the motherboard, and with a screw in the center of the plexiboard to add pressure to the waterblock. The waterblock is homemade. I used drill to make one BIG cave in the copperblock..hehe.. no spiral inside. just one big hole

Jim · 05-03-2002, 06:31 AM

Quote:

Originally posted by Zultan

The mounting for the waterblock is made of plexi.It's mounted in the 4 holes in the motherboard, and with a screw in the center of the plexiboard to add pressure to the waterblock. The waterblock is homemade. I used drill to make one BIG cave in the copperblock..hehe.. no spiral inside. just one big hole

How is the center screw set up to exert pressure on the block? I cannot determine this from your images?
I am not doubting you, I just cannot see the complete component.
Jim

Zultan · 05-03-2002, 06:43 AM

it's threads in the centerhole of the plexi.

Cyco-Dude · 05-03-2002, 11:03 AM

jim, it most likely installs the same way as Unablock (Zultan, correct me if im wrong

)

Jim · 05-03-2002, 04:17 PM

Quote:

Originally posted by Zultan
it's threads in the centerhole of the plexi.

That was one of my thoughts, could the plexi crack?
JIm

05-02-2002, 11:35 AM	#5
Hellion_Prime Cooling Neophyte Join Date: Nov 2000 Location: Arlington, MA, US Posts: 90	What is that heatercore off of, anyway? --HP __________________ That which does not kill me had BETTER do enough damage to keep me from firing back!

05-03-2002, 04:33 AM	#7
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	do you guys have power over there or do you wind up your cpu's? :P I love the pencils and zip tie, I can't stop laughing apart from that, very nice __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

05-02-2002, 08:27 AM	#2
UnaClocker Cooling Savant Join Date: Apr 2000 Location: Bremerton, WA Posts: 514	Looks good, is that vinyl or tygon? __________________ The UnaClocker Watercooler Extraordinaire! Overclock till it goes BOOM!

05-02-2002, 08:39 AM	#3
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	thats a big heatercore! i wouldve used two fans to cool it instead of one tho... lol, mounting the hdds w/ rubber bands and broken pencils, classic

05-03-2002, 12:00 AM	#6
Razor6 Cooling Savant Join Date: Apr 2002 Location: Houston, TX Posts: 192	That heater core looks like the one I bought. Common core #2-199, GDI part #39-8219, paid 15.99 at O'Reillys. Listed as 9 1/2" X 6 1/8"

05-03-2002, 05:08 AM	#8
Zultan Cooling Neophyte Join Date: Oct 2001 Location: Norway Posts: 5	The heatercore is from an opel rekord 79-model. The intake/outlet was not like your drawing, but came out on the side of it, so i hade to cut off , make new holes, and solder in the front. I paid about 15 bucks for it from a scrapyard.(and Norway is an expensive country, i'll promise u!! The mounting for the waterblock is made of plexi.It's mounted in the 4 holes in the motherboard, and with a screw in the center of the plexiboard to add pressure to the waterblock. The waterblock is homemade. I used drill to make one BIG cave in the copperblock..hehe.. no spiral inside. just one big hole

05-03-2002, 06:43 AM	#10
Zultan Cooling Neophyte Join Date: Oct 2001 Location: Norway Posts: 5	it's threads in the centerhole of the plexi.

05-03-2002, 11:03 AM	#11
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	jim, it most likely installs the same way as Unablock (Zultan, correct me if im wrong )

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)