![]() | ||
|
|
Water Block Design / Construction Building your own block? Need info on designing one? Heres where to do it |
![]() |
Thread Tools |
![]() |
#1 |
Cooling Savant
Join Date: May 2003
Location: shanghai, china
Posts: 200
|
![]()
anyone know of a good radiator I can get that can fit about 2 80cm fans? my main concern is size, I want to mount it in the front of my case lian-li pc-60, a decent heater core would also work, the maximum length is about 8" and height 5.2", I'm also hoping to not have to spend more then $45 with shiping, thanks alot
|
![]() |
![]() |
![]() |
#2 |
Thermophile
Join Date: Oct 2002
Location: U.S.A = Michigan
Posts: 1,243
|
![]()
Sysfx.net carrys a single pass rad that sounds like what you want.
3.5" X 7.5" if I recall right, but I think they wanted more like $60.00 for them. |
![]() |
![]() |
![]() |
#4 |
Thermophile
Join Date: Jun 2001
Location: The deserts of Tucson, Az
Posts: 1,264
|
![]()
Err why not use a heater core if it will fit? <$20 and very low performance so you might actually get some air through it with a 80mm fan.
I had ok results using 3 80mm fans ducted onto a large heatercore. It was really quiet anyway. |
![]() |
![]() |
![]() |
#5 |
Responsible for 2%
of all the posts here. Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
|
![]()
Check the heatercore database, then pick it up from www.leakycar.com . Great service!
|
![]() |
![]() |
![]() |
#6 |
Cooling Savant
Join Date: Sep 2002
Location: Norway
Posts: 201
|
![]()
What small HC would anyone suggest then?
I would like too know too ![]() -P-
__________________
Boo! |
![]() |
![]() |
![]() |
#7 |
Cooling Savant
Join Date: May 2003
Location: shanghai, china
Posts: 200
|
![]()
the BLack ice micro 2 looks really sweet, anyone know if available in the U.S. or the price?
I've looked at some heatercores and the only ones around the right size I can find are like $40, for that I might as well just buy a radiator... if you find anyone knows of any decent priced ones that are fairly small, I'd like to know thanks |
![]() |
![]() |
![]() |
#8 |
Cooling Savant
Join Date: Mar 2003
Location: H-town, TX
Posts: 122
|
![]()
you can find them in the US about anywhere and they cost about $40 to $45.
http://becooling.safeshopper.com/17/cat17.htm?157 http://www.cooltechnica.com/Merchant...ategory_Code=R http://www.dangerden.com/mall/Radiators/radiators.asp |
![]() |
![]() |
![]() |
#9 |
Cooling Savant
Join Date: May 2003
Location: shanghai, china
Posts: 200
|
![]()
yea, the micro is there, but on some of the UK sites there is a black ice micro 2, which mounts 2 80cm fans... I was hoping I could find one of those around here...
|
![]() |
![]() |
![]() |
#10 |
Cooling Savant
Join Date: Mar 2003
Location: H-town, TX
Posts: 122
|
![]()
http://www.sysfx.net/cgi-bin/cart.ex...t%20Exchangers
they have a dual 80mm radiator althought they seem restrictive. |
![]() |
![]() |
![]() |
#11 |
Cooling Savant
Join Date: May 2003
Location: shanghai, china
Posts: 200
|
![]()
yeah... but $65 plus shipping is alot.. I was hoping to find a heatercore about the same size but havn't had any luck yet :-(
|
![]() |
![]() |
![]() |
#12 |
Cooling Savant
Join Date: Mar 2003
Location: H-town, TX
Posts: 122
|
![]() |
![]() |
![]() |
![]() |
#13 |
Cooling Savant
Join Date: May 2003
Location: shanghai, china
Posts: 200
|
![]()
don't mean to be a pain in the a$$ but everyone is always talking about heater cores aroudn $20, but whenever I look one up they're lik $60, do I need to keep looking or what (p.s. most of the ones I'm checking ar 7.5x5.25 or smaller)
|
![]() |
![]() |
![]() |
#14 |
Responsible for 2%
of all the posts here. Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
|
![]()
Keep looking, yes!
If you've got a good fan, look at heatercores that are at least 2 inch thick. They're usually more expensive though. I just got Fedco# 2-304, 6 by 8 by 1 5/8", and got it for $29.00. If my fan tests well, I might pickup a second one. |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|