Custom Shrouds for Heatercores

greenman100 · 10-10-2004, 03:53 PM

These shrouds will fit any heatercore that is near 10.5"x5.6" finned area (+-.2")

They are made out of 26 guage zinc plated steel.

The fan holes are cut with a holesaw, resulting in a smooth edge, opposed to a jigsaw, which leaves a ragged edge.

Also note the use of foam to seal against the irregular shape of the heatercore, allowing for maximum airflow through the heatercore, with no blowby.

The fan mounting holes are oversized to 1/4" to allow for more versatile mounting, like if you already have holes in your case.

I can make other shapes and sizes. I can also paint any color, for $5 more.

Will come with all mounting hardware, please specify rod length when ordering:
Heatercore, one shroud, fans: 6"
Fans, one shroud, heatercore, another shroud, fans: 9"

Price will be $25 shipped per shroud with all mounting hardware. Foam for the heatercore seal will be applied by me, foam for the fan will be included and have a sticky side, for you to apply at your discretion.

Please specify heatercore model when ordering.

PayPal preferred, cash/check/money order accepted, open to trades.

Marvin · 11-02-2004, 09:04 PM

greenman100, do you make this core shroud ? I bought it from WA2 :

regards

greenman100 · 11-02-2004, 10:27 PM

yup, no problem

Marvin · 11-03-2004, 06:12 AM

so, ygpm

10-10-2004, 03:53 PM	#1
greenman100 Cooling Savant Join Date: Jun 2004 Location: Florida Posts: 414	Custom Shrouds for Heatercores These shrouds will fit any heatercore that is near 10.5"x5.6" finned area (+-.2") They are made out of 26 guage zinc plated steel. The fan holes are cut with a holesaw, resulting in a smooth edge, opposed to a jigsaw, which leaves a ragged edge. Also note the use of foam to seal against the irregular shape of the heatercore, allowing for maximum airflow through the heatercore, with no blowby. The fan mounting holes are oversized to 1/4" to allow for more versatile mounting, like if you already have holes in your case. I can make other shapes and sizes. I can also paint any color, for $5 more. Will come with all mounting hardware, please specify rod length when ordering: Heatercore, one shroud, fans: 6" Fans, one shroud, heatercore, another shroud, fans: 9" Price will be $25 shipped per shroud with all mounting hardware. Foam for the heatercore seal will be applied by me, foam for the fan will be included and have a sticky side, for you to apply at your discretion. Please specify heatercore model when ordering. PayPal preferred, cash/check/money order accepted, open to trades. __________________ "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others have labored hard for." --Socrates "greenman100 = obnoxious ass hole"-gazorp

11-02-2004, 09:04 PM	#2
Marvin Cooling Neophyte Join Date: Aug 2002 Location: Brazil Posts: 81	greenman100, do you make this core shroud ? I bought it from WA2 : regards __________________ AMD 4200+ DFI Lanparty Ultra-D 1 Gb PC4000 Geil Ultra-D XT1900 PCE 2x WD Raptor Raid 0 2x Barracuda Raid 0 DD 404A

11-02-2004, 10:27 PM	#3
greenman100 Cooling Savant Join Date: Jun 2004 Location: Florida Posts: 414	yup, no problem __________________ "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others have labored hard for." --Socrates "greenman100 = obnoxious ass hole"-gazorp

11-03-2004, 06:12 AM	#4
Marvin Cooling Neophyte Join Date: Aug 2002 Location: Brazil Posts: 81	so, ygpm __________________ AMD 4200+ DFI Lanparty Ultra-D 1 Gb PC4000 Geil Ultra-D XT1900 PCE 2x WD Raptor Raid 0 2x Barracuda Raid 0 DD 404A

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)