soyo dragon

imagex · 03-31-2002, 01:34 PM

I've been tring to get my water block on my new soyo and for some reason it wont post, im useing four 1/4 20 studs with poly washer that are coated with dieletric grease. this worked fine on my old kt7 but i think mybe its grounding in the mobo holes?anyone else useing though board studs? it runs fine with a normal heatsink and fan but wont post useing the studs and water block:shrug:

Brad · 03-31-2002, 03:02 PM

yeah thats probably about the only thing it can be. why not use some sheets of paper to act as an insulator, and try that out

imagex · 03-31-2002, 06:26 PM

good idea, I was going to try to hunt down some nylon studs, but come to think of it I have some heatshrink tubing that will work.

Kevin · 03-31-2002, 09:33 PM

Did it work before? Or is this the first time you've tried the board? Try turning it on for a second with the H2O block just sitting on the CPU, and nothing in the holes. Then if you see a picture, shut off the power quickly.
-Kevin

imagex · 04-01-2002, 09:35 AM

it been running fine with a reguarl air heat sink, gona wait till next week end to test it again.

03-31-2002, 01:34 PM	#1
imagex Cooling Savant Join Date: Mar 2001 Location: south FL Posts: 220	soyo dragon I've been tring to get my water block on my new soyo and for some reason it wont post, im useing four 1/4 20 studs with poly washer that are coated with dieletric grease. this worked fine on my old kt7 but i think mybe its grounding in the mobo holes?anyone else useing though board studs? it runs fine with a normal heatsink and fan but wont post useing the studs and water block:shrug: __________________ Overkill'n Overclock'n Hybrid Mobile Solutions

03-31-2002, 03:02 PM	#2
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	yeah thats probably about the only thing it can be. why not use some sheets of paper to act as an insulator, and try that out __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

03-31-2002, 06:26 PM	#3
imagex Cooling Savant Join Date: Mar 2001 Location: south FL Posts: 220	good idea, I was going to try to hunt down some nylon studs, but come to think of it I have some heatshrink tubing that will work. __________________ Overkill'n Overclock'n Hybrid Mobile Solutions

03-31-2002, 09:33 PM	#4
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	Did it work before? Or is this the first time you've tried the board? Try turning it on for a second with the H2O block just sitting on the CPU, and nothing in the holes. Then if you see a picture, shut off the power quickly. -Kevin __________________ I used to throw hot coffee all over the ass of the horse there, then whip him while he was kickin' at me. Those f***in things are crazy.

04-01-2002, 09:35 AM	#5
imagex Cooling Savant Join Date: Mar 2001 Location: south FL Posts: 220	it been running fine with a reguarl air heat sink, gona wait till next week end to test it again. __________________ Overkill'n Overclock'n Hybrid Mobile Solutions

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)