WTB: Cheap AMD Water Block

FishaOfMen · 02-18-2004, 08:28 AM

Visiontek GeForce3 classic w/volt-mod - This card can do 235/515 without the volt-mod. I've put together an optional volt-mod that is composed of SMD grabbers (5 total) and three trimmers. It just clips on and off. With the volt-mod, which I only used once, I've been able to bench 3DMark01 successfully at 260/530. The Crystal Orb that I was using with it started getting really noisy, so I reattached the stock cooler. I'll ship with the Crystal Orb for an extra dollar if you want it. $50 + shipping

DigitalDoc5+ (black) - This is brand new in its original package. Everything is included. $35 + shipping

2x120mm fan Heater Core (Fedco #2-342) - This single pass core is possibly the best heater core for watercooling available. It's been tested by Bill Adams and shown to outperform most everything out there. I got this brand new from AutoZone and have not modified it. $20 + shipping

Tygon Tubing - 3/8" ID and 9/16" OD, B-44-4X formulation - great for watercooling. This stuff is a little old and has yellowed a twinge but still has great strength and flexibility. $0.75 + shipping

120mm Panaflo U1A - 115 CFM 45.5 dBA. $8 + shipping

Vantec Copper Iceberq CCB-A1C - This is a great northbridge cooler. The base is lapped with 600 grit sandpaper. $6 + shipping

E-mail me, let me know what you want, and I'll give you a quote on shipping costs. All items will be shipped via UPS 3 Day Select or USPS Priority w/delivery confirmation. Shipping method will depend solely on which is easier for me at the time. E-mail if interested to andrew_taki[AT]sbcglobal[DOT]net. Please do not PM.

My Heatware
My eBay refs

02-18-2004, 08:28 AM	#1
FishaOfMen Cooling Neophyte Join Date: May 2003 Location: Austin, TX, USA Posts: 17	FS: New #2-342, GeForce3 w/volt-mod, DigiDoc5+, Tygon, Panaflo, Iceberq, etc. Visiontek GeForce3 classic w/volt-mod - This card can do 235/515 without the volt-mod. I've put together an optional volt-mod that is composed of SMD grabbers (5 total) and three trimmers. It just clips on and off. With the volt-mod, which I only used once, I've been able to bench 3DMark01 successfully at 260/530. The Crystal Orb that I was using with it started getting really noisy, so I reattached the stock cooler. I'll ship with the Crystal Orb for an extra dollar if you want it. $50 + shipping DigitalDoc5+ (black) - This is brand new in its original package. Everything is included. $35 + shipping 2x120mm fan Heater Core (Fedco #2-342) - This single pass core is possibly the best heater core for watercooling available. It's been tested by Bill Adams and shown to outperform most everything out there. I got this brand new from AutoZone and have not modified it. $20 + shipping Tygon Tubing - 3/8" ID and 9/16" OD, B-44-4X formulation - great for watercooling. This stuff is a little old and has yellowed a twinge but still has great strength and flexibility. $0.75 + shipping 120mm Panaflo U1A - 115 CFM 45.5 dBA. $8 + shipping Vantec Copper Iceberq CCB-A1C - This is a great northbridge cooler. The base is lapped with 600 grit sandpaper. $6 + shipping E-mail me, let me know what you want, and I'll give you a quote on shipping costs. All items will be shipped via UPS 3 Day Select or USPS Priority w/delivery confirmation. Shipping method will depend solely on which is easier for me at the time. E-mail if interested to andrew_taki[AT]sbcglobal[DOT]net. Please do not PM. My Heatware My eBay refs Last edited by FishaOfMen; 02-27-2004 at 08:49 AM. Reason: tired of old posting

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)