Aqua Tube mounting Holes?

DETN8R · 04-24-2004, 06:12 PM

Ok, I have an AquaTube Rev 1.1 here but I didnt order the mounting bracket.

Does anyone perhaps have layout for the holes? Or measurements? Anything that would help?

Thanks.

DETN8R · 04-25-2004, 01:02 PM

Doesnt anyone know?

jaydee · 04-25-2004, 02:19 PM

A link to the product might help. Never heard of it.

DETN8R · 04-25-2004, 02:25 PM

Official Link: http://www.aqua-computer.de/ click "ausgleichsbehalter"
where I got mine: http://snt-systems.com/catalog/produ...products_id=38

DETN8R · 04-28-2004, 10:23 PM

anyone know? anyone at all?

bigben2k · 04-28-2004, 10:35 PM

My german is pretty rusty...

If you have the unit, why don't you just measure it?

I know it's not easy to deal with a 5 bolt pattern that's in a circle, but all you really need is the radius of the circle-line that runs through the middle of the bolt pattern, then use a friction compass to draw the circle onto whatever material you want to use.

Other than that, all you really need to know is that there are 360 degrees in a circle, and that each bolt would be seperated by an angle of 72 degrees. (360 / 5 = 72).

:shrug:

DETN8R · 04-28-2004, 10:55 PM

Thank you bigben.

bigben2k · 04-29-2004, 02:45 PM

Alternatively, you can recreate a template made of cardboard, then reproduce it in Alu, or whatever material you want to use. It can be tricky to get the bolt pattern to line up properly, so you might want to give yourself some play.

Let us know how it turns out, ok?

04-24-2004, 06:12 PM	#1
DETN8R Cooling Neophyte Join Date: Apr 2004 Location: US Posts: 5	Aqua Tube mounting Holes? Ok, I have an AquaTube Rev 1.1 here but I didnt order the mounting bracket. Does anyone perhaps have layout for the holes? Or measurements? Anything that would help? Thanks.

04-28-2004, 10:35 PM	#6
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	My german is pretty rusty... If you have the unit, why don't you just measure it? I know it's not easy to deal with a 5 bolt pattern that's in a circle, but all you really need is the radius of the circle-line that runs through the middle of the bolt pattern, then use a friction compass to draw the circle onto whatever material you want to use. Other than that, all you really need to know is that there are 360 degrees in a circle, and that each bolt would be seperated by an angle of 72 degrees. (360 / 5 = 72). :shrug: __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

04-29-2004, 02:45 PM	#8
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	Alternatively, you can recreate a template made of cardboard, then reproduce it in Alu, or whatever material you want to use. It can be tricky to get the bolt pattern to line up properly, so you might want to give yourself some play. Let us know how it turns out, ok? __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

04-25-2004, 01:02 PM	#2
DETN8R Cooling Neophyte Join Date: Apr 2004 Location: US Posts: 5	Doesnt anyone know?

04-25-2004, 02:19 PM	#3
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	A link to the product might help. Never heard of it.

04-25-2004, 02:25 PM	#4
DETN8R Cooling Neophyte Join Date: Apr 2004 Location: US Posts: 5	Official Link: http://www.aqua-computer.de/ click "ausgleichsbehalter" where I got mine: http://snt-systems.com/catalog/produ...products_id=38

04-28-2004, 10:23 PM	#5
DETN8R Cooling Neophyte Join Date: Apr 2004 Location: US Posts: 5	anyone know? anyone at all?

04-28-2004, 10:55 PM	#7
DETN8R Cooling Neophyte Join Date: Apr 2004 Location: US Posts: 5	Thank you bigben.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)