![]() | ||
|
|
General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums. |
![]() |
Thread Tools |
![]() |
#26 | |
Cooling Neophyte
Join Date: Apr 2004
Location: Central Cali, USA
Posts: 48
|
![]() Quote:
![]() ![]() ![]() |
|
![]() |
![]() |
![]() |
#27 |
Cooling Neophyte
Join Date: Dec 2003
Location: Montana
Posts: 5
|
![]()
Thank you, Snow. We have some deals on ebay right now. The link in on our homepage. I have to say your setup looks really nice
![]() |
![]() |
![]() |
![]() |
#28 |
Big PlayerMaking Big Money
Join Date: Aug 2001
Location: irc.lostgeek.com #procooling.com
Posts: 4,782
|
![]()
Polarflo:
Is that a money back guarantee that your block is the best on the market? Sure sounds like that's what you said..
__________________
Getting paid like a biker with the best crank... -MF DOOM |
![]() |
![]() |
![]() |
#29 | |
CoolingWorks Tech Guy Formerly "Unregistered"
Join Date: Dec 2000
Location: Posts: 2,371.493,106
Posts: 4,440
|
![]() Quote:
but Steve, if you are concerned about "quantifiable data", then I suggest you, as the mfgr, post the correct numbers are these numbers bad also ? EDIT: sorry fellows, the graph was getting attention not desired (for those who may have made a copy, please do not re-post; Thanks Steve, by any objective measurement the PolarFLO is not competitive, despite having a superbly finished bp ! Last edited by BillA; 05-02-2004 at 01:12 PM. |
|
![]() |
![]() |
![]() |
#30 | |
Cooling Neophyte
Join Date: Dec 2003
Location: Montana
Posts: 5
|
![]() Quote:
I am typically more reserved than this... I could tell you that we have the best block on the market, but the "best" means so many different things to everyone. Water cooled systems vary incredibly. In the majority of our reviews where the PolarFLO SF is tested against another block, we have the lower temperatures. I will say this... Our quality is unsurpassed. |
|
![]() |
![]() |
![]() |
#31 | |
Cooling Neophyte
Join Date: Dec 2003
Location: Montana
Posts: 5
|
![]() Quote:
Uh-oh... this is why i am typically more reserved. Bill, i assume those numbers were generated by the testing system you developed awhile back. Those numbers apply specifically to that test setup. In "real-world" tests, those tests that use a system with a processor and simply change out the water block, our temps are always lower. So, if your numbers, generated from your bench test, indicate our "lack" performance, why then in a real-world test do we out-perform? Quantifiable data is only as good as the system it is tested in. |
|
![]() |
![]() |
![]() |
#32 |
Big PlayerMaking Big Money
Join Date: Aug 2001
Location: irc.lostgeek.com #procooling.com
Posts: 4,782
|
![]()
"Quantifiable data is only as good as the system it is tested in."
Quite so. That's Bill's point I suspect. If I were to review this wb I would need to mount it on a motherboard that used the insocket thermistor to really see its performance potential?
__________________
Getting paid like a biker with the best crank... -MF DOOM |
![]() |
![]() |
![]() |
#33 |
Cooling Savant
Join Date: May 2003
Location: Okotoks, A.B. Canada
Posts: 726
|
![]()
I just bought a Polarflow video block.
I didn't plan to buy one originally but after my fan died on my video card I needed a block. So after looking around there was only one block I could find that would mount on the card at a 3oclock position because I have BIXmicro2 resting right against the top of my video card. Polorflow was the solution. I went to their site. Ordered the block. aprox $45 for the block... not to pricy... Then check into shipping... $30 flat rate ... for the little box that I got I paid $30US. I have received boxes 4 times larger from other US based websites and have paid less in shipping. Ok now up to $75 US. Then when the block arrived I had to pay an added $40 CDN for customs (brokerage fees and stuff) so the block cost me aprox $143CDN for a video block. Well I paid more for the block then I did for the video card. Polorflow has no control with what customs charges. However, their flat rate international shipping for $30 is terrible. I will not buy from Polarflow again. Not until something is done about shipping methods.
__________________
"Great spirits have always encountered violent opposition from mediocre minds" - (Einstein) |
![]() |
![]() |
![]() |
#34 | |
CoolingWorks Tech Guy Formerly "Unregistered"
Join Date: Dec 2000
Location: Posts: 2,371.493,106
Posts: 4,440
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#35 | |
Cooling Savant
Join Date: Jul 2002
Location: Toronto, Canada
Posts: 381
|
![]() Quote:
__________________
Michael E. Robbins M.A.Sc. Candidate, University of Toronto 12.1 GHz of AMD's finest (17.7 GHz total) crunching proudly for the AMDMB.com Killer Frogs SETI BOINC: Dual Opteron 246s (Iwill DK8N) | XP2800+ (Shuttle SN41G2) | 3x XP2400+ (ASUS A7N266-vm) SETI BOINC: 2x P4 2.8E (ASUS P4R800-vm) | Crunching 24/7 |
|
![]() |
![]() |
![]() |
#36 |
Big PlayerMaking Big Money
Join Date: Aug 2001
Location: irc.lostgeek.com #procooling.com
Posts: 4,782
|
![]()
You can't really fault Polarflo for the shittiness that is Canadian customs either. There is a $5 fee for assessing the customs fees. Isn't that their job? Also they opened a package Jaydee sent me and arbitrarily revalued it to be just over the legal limit of "no charge gift" so that I could pay them $8 ($5 fee plus $3 charge). It's like a ****ing third world country sometimes.
__________________
Getting paid like a biker with the best crank... -MF DOOM |
![]() |
![]() |
![]() |
#37 |
Cooling Neophyte
Join Date: Dec 2003
Location: Montana
Posts: 5
|
![]()
I will conclude with this:
All of the reviews (SF and non-SF PolarFLO CPU blocks) are posted on our website. You will see a range of systems and a range of performance. To use one test system to measure or indicate overall performance is silly. Rather, look at all the independent results as a general gage to determine performance vs. price vs. quality vs. beauty vs. service. Respectfully yours, Steve |
![]() |
![]() |
![]() |
#38 | |
Cooling Savant
Join Date: May 2003
Location: Okotoks, A.B. Canada
Posts: 726
|
![]() Quote:
if you apply a specific amount of heat to the block and pump through a specific amount of water at a specific temperature. you should get accurate data that would be good to compare diffrent blocks from diffrent companies. unfortunatly from the graph above, polorflow doesn't rate the best, or 2nd best.. or 3rd best...or even 4th best... AngryAlpaca grab the offer from Polarflow. garenteed way to get a free block... what you would do with it i don't know because it doesn't rate anywhere as good as WW or cascade. my 2¢
__________________
"Great spirits have always encountered violent opposition from mediocre minds" - (Einstein) |
|
![]() |
![]() |
![]() |
#39 |
Cooling Savant
Join Date: Feb 2004
Location: Isle of Man
Posts: 269
|
![]()
I think it is generally agreed that the quality of the average waterblock review is pretty low - due to a variety of factors, the results are not scientific (read: repeatable). I don't see how looking at individual results is better than seeing how all the blocks compared using the same testbed using laboratory standards.
That is not to say BillA's graph is the be all and end all, since different designs work better on different sized heat sources (some blocks cool a small die like an AMD XP better, whereas some excel on larger heat sources like peltiers or AMD64/P4 heatspreaders) and some designs cool "hot spots" better, allowing for higher stable overclocks. However, I believe it is fair to say that his results are a better gauge of performance than a review where the quasi-reliable insocket thermistor is the only judge.
__________________
If not, why not? |
![]() |
![]() |
![]() |
#40 |
Cooling Neophyte
Join Date: Jul 2003
Location: massachusetts
Posts: 10
|
![]()
AngryAlpaca-
I did not say that I thought the PolarFlo was one of the best, I did say that it looks pretty decent. A c/w of .17 is not one of the best ratings I have ever seen for a block, but it is FAR from the worst I have seen. A block with a c/w of .17 should do a pretty good job of cooling a hot cpu. Will it do as well as a block with a c/w of .13? Not likely as long as all other system variables are unchanged....but even then I would have to say it IS possible. But it will do better than a block with a c/w of .21- and I have seen far more commercial blocks with c/ws that test above .20 than below. I have used a couple of different water blocks and personally I think that any block with a c/w under .20 is ample. Lower IS better, as a rule but there are often other considerations that must be made when buying components for a water cooled system. Would I use a Polarflo block? Yes, if I needed a block and found one at a good price. I've used a Koolance block too- not as bad as reports made out either, when put into a decent system. ![]() |
![]() |
![]() |
![]() |
#41 |
Cooling Savant
Join Date: Jan 2004
Location: Alberta
Posts: 631
|
![]()
If I were to test it, I could probably guarantee that I'd get better temperatures. I use a Maze 4 at the moment (learned SO much since then...). Also, my temperature reading, and my setup, is very inaccurate like the majority of reviewers'. If you want to prove that your block can outperform most blocks on the market, send one to pHaestus. He uses an actual system, and he tests well. It IS true that your block is high quality, probably the highest quality of any block, but it seems to be designed poorly.
rogerdugans: Looks are EVER so important! ![]() |
![]() |
![]() |
![]() |
#42 |
CoolingWorks Tech Guy Formerly "Unregistered"
Join Date: Dec 2000
Location: Posts: 2,371.493,106
Posts: 4,440
|
![]()
quite agree in part Steve, all products have a 'feature set' - and the relative importance of each feature (to the consumer) is presumably what guides buying decisions
- all is fine BUT when the adjective "best" is used, EXPECT QUESTIONS and I quite disagree with your appraisal of testing from bench to bench, the values may change but the relationships will not (if the procedure is consistent) are you suggesting that consistent results from 'scientific testers' is offset by a 'review site' ? -> not here, and not ever 'till they learn what they are doing BalefireX yes, but the sensitivity to different sized heat sources is quite related to the bp thickness, in this regard the PolarFLO is quite similar to the AquaJoe, MCW5000, MCW6000, and others rogerdugans I think you just slammed your d*ck in the dirt "A block with a c/w of .17 should do a pretty good job of cooling a hot cpu. Will it do as well as a block with a c/w of .13? Not likely as long as all other system variables are unchanged....but even then I would have to say it IS possible." please explain . . . . |
![]() |
![]() |
![]() |
#43 |
Pro/Staff
Join Date: Oct 2001
Location: Klamath Falls, OR
Posts: 1,439
|
![]()
This is a warning, guys. I know this can get ugly as people are starting to question the truthfullness of each other. So, please remeber the rules: state your opinion and leave off the attacks. If the facts make someone look good or bad, that's the way it should be.
As an example (Bill, you're not the only one, but your post is the current newest post in the thread), please stop with the "slammed your d*ck in the dirt" kind of stuff. Flame wars are really not productive. |
![]() |
![]() |
![]() |
#44 |
Big PlayerMaking Big Money
Join Date: Aug 2001
Location: irc.lostgeek.com #procooling.com
Posts: 4,782
|
![]()
Wait isn't that a compliment? As in "When he whipped it out, there was a cloud of dust that arose from it hitting the ground"?
__________________
Getting paid like a biker with the best crank... -MF DOOM |
![]() |
![]() |
![]() |
#45 |
Pro/Staff
Join Date: Oct 2001
Location: Klamath Falls, OR
Posts: 1,439
|
![]()
When someone looks up thread hijacking, they now see a picture of pHaestus.
![]() |
![]() |
![]() |
![]() |
#46 |
Cooling Savant
Join Date: Jan 2004
Location: Alberta
Posts: 631
|
![]()
LMAO @ pHaestus. What's the matter with saying that someone is a jackass for saying something that contradicts itself on so many levels? If all the variables remain the same, so must the performance. If the flow or die size change, then perhaps the performance can change.
|
![]() |
![]() |
![]() |
#47 |
CoolingWorks Tech Guy Formerly "Unregistered"
Join Date: Dec 2000
Location: Posts: 2,371.493,106
Posts: 4,440
|
![]()
Brians256
I know rogerdugans (and am friendly with him I guess I have to add), and I believe he will understand how to take my rude comment I am awaiting his response, I suspect he will concur that he did indeed 'slam his d*ck in the dirt' with that statement |
![]() |
![]() |
![]() |
#48 | ||
Cooling Neophyte
Join Date: Apr 2004
Location: Central Cali, USA
Posts: 48
|
![]()
Wow.... I leave my thread for a few hours and come back and it's on fire!!! Flames everywhere!!! lol..... quick someone put it out!
![]() _________________________________________ Quote:
___________________________________ Quote:
Last edited by SnowRider; 04-30-2004 at 02:31 PM. |
||
![]() |
![]() |
![]() |
#49 | |
Cooling Neophyte
Join Date: Jul 2003
Location: massachusetts
Posts: 10
|
![]()
rofl
![]() I have been slammed in the past and always learned something from it. Sometimes it has been proven to ven ME that I am wrong. Other times I have only had my beliefs reinforced. ![]() Quote:
1) my own belief that a lower c/w will result in better cooling 2) reports that I have seen showing that a low-flow optimized block with a worse c/w can perform better than a high-flow optimized block WHEN BOTH ARE USED IN A SYSTEM WITH LOW FLOW. I have NOT personally tested this...or anything else with great accuracy. I have neither the equipment, education or money to test all the things I would like. What I do know are two things: I have some knowledge of water cooling, but I know far from everything. I am a hobbyist, not a scientist. This thread is now digressing from its original intent. Call me what you will, but please start a new thread rather than thread-jacking this one. ![]() |
|
![]() |
![]() |
![]() |
#50 | |
Cooling Neophyte
Join Date: Jul 2003
Location: massachusetts
Posts: 10
|
![]()
lol-->
Quote:
![]() I will admit that I left myself open to those who want to slam my anatomy though. ![]() Bill and I have gone rounds before and he has taught me quite a bit. One of the things he himself taught me about water cooling is to not assume that I know everything just because I can put together a system that performs well. No offense taken- much harder to offend me than that! ![]() [/end threadjack] |
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|