Taam (Rio 1100 Pump)

kronchev · 04-29-2004, 02:55 AM

Has anyone any experiance with this pump, if so how good/bad is it

kronchev · 05-09-2004, 02:23 PM

id love some help with this now that I'm nearly done lapping my block, my rad is:

and I have money to get a new CPU and a buyer for the old one which means Ill only have to spend $30. plus I have some stuff up for sale so I can get a dually board now...

kronchev · 05-12-2004, 12:08 AM

screw it I bought a mag 3 with 2 day shipping

krazy · 05-12-2004, 01:58 AM

you'll like the Danner. It's quiet, seems to be reliable, and it was cheap, right?

Here's some preliminary info I learned the hard way and shared:
http://forums.procooling.com/vbb/showthread.php?t=8991

kronchev · 05-12-2004, 02:14 AM

Quote:

Originally Posted by krazy

you'll like the Danner. It's quiet, seems to be reliable, and it was cheap, right?

Here's some preliminary info I learned the hard way and shared:
http://forums.procooling.com/vbb/showthread.php?t=8991

meh, it was 50 because I chose 2 day shipping. If I had gotten regular it was like $38. Not bad at all

I just need it to pump more than my poor Hydor L20 is

TheXtremeDude · 05-16-2004, 07:11 AM

I have been running the Rio 800 pump in a -48c chiller submerged for about a year now. It is an amazing little pump. Big specs for a little pump! It must be in the design of the impeller blades. I have been running a Danner5 inline for a year, also a fine pump. The danner3 seems to be most peoples choice over the 5.

04-29-2004, 02:55 AM	#1
kronchev Cooling Savant Join Date: Mar 2004 Location: Lawrenceville, NJ Posts: 254	Taam (Rio 1100 Pump) Has anyone any experiance with this pump, if so how good/bad is it __________________ Ghetto riggin'!

05-09-2004, 02:23 PM	#2
kronchev Cooling Savant Join Date: Mar 2004 Location: Lawrenceville, NJ Posts: 254	id love some help with this now that I'm nearly done lapping my block, my rad is: and I have money to get a new CPU and a buyer for the old one which means Ill only have to spend $30. plus I have some stuff up for sale so I can get a dually board now... __________________ Ghetto riggin'!

05-12-2004, 12:08 AM	#3
kronchev Cooling Savant Join Date: Mar 2004 Location: Lawrenceville, NJ Posts: 254	screw it I bought a mag 3 with 2 day shipping __________________ Ghetto riggin'!

05-12-2004, 01:58 AM	#4
krazy Cooling Savant Join Date: Mar 2003 Location: St. Paul, Minnesota, USA Posts: 123	you'll like the Danner. It's quiet, seems to be reliable, and it was cheap, right? Here's some preliminary info I learned the hard way and shared: http://forums.procooling.com/vbb/showthread.php?t=8991 __________________ Abit NF7-S ... xp1800+ ... Abit GF4ti4200 ... Maxtor 120gb SATA150 Currently gathering parts to water cool everything! (read about the project)

05-16-2004, 07:11 AM	#6
TheXtremeDude Cooling Neophyte Join Date: May 2004 Location: USA Posts: 13	I have been running the Rio 800 pump in a -48c chiller submerged for about a year now. It is an amazing little pump. Big specs for a little pump! It must be in the design of the impeller blades. I have been running a Danner5 inline for a year, also a fine pump. The danner3 seems to be most peoples choice over the 5.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)