|
|
Mod / System Gallery You got your machine all Spiffy'd up? Got the Chrome and the Fuzzy Dice? Show em off! (Free Image Hosting) |
Thread Tools |
11-04-2004, 07:03 AM | #51 |
Cooling Savant
Join Date: Aug 2002
Location: Croatia
Posts: 969
|
LOL, g.l., remember that I'm making two sets, only one set into my case so there's enuff space
Been playing with hall sensor but without much luck, I can make this dissassembled fan to read a rpm from another fan, holding the hall close to the magnet of that spinning fan, but seems to me that hardware on the mobo that count signals from it cannot read small rpm, so think I'll have to find another way to do it, still searching I also had to remove the drive cage and move it further to one side of the case to make place for res. The res will be (hopefully) mounted on the hinges to swing ******ds the case for the ease of (re)filling. That's about all for now, got second res almost ready, must seal the first one Cheers!
__________________
'Out of cheese error... ...please reboot the universe (press the GBL to continue)' |
11-08-2004, 10:23 AM | #52 |
Cooling Neophyte
Join Date: Sep 2003
Location: Suffolk.UK
Posts: 92
|
looking sweet man, you got an update?
|
11-08-2004, 04:39 PM | #53 |
Cooling Savant
Join Date: Aug 2002
Location: Croatia
Posts: 969
|
Gettin there
Yup
Didn't do much over the weekend, but this afternoon was productive, none the less. Both res, flow indicators, NB and CPU blocks needs sealing between the layers, all the barbs are sealed in their places. One res is mounted on the hinges, and after sealing will be mounted into the place, gotta drill one more hole for securing bolt that will not let the res swing on the hinges. The initial idea (that kickass magnet from broken hdd) didn't work, I had to come up with somethin else. Cpu bases need lapping and thats (almost) it I'll post more piccies of the two sets when I finish them all Soon I hope Cheers!
__________________
'Out of cheese error... ...please reboot the universe (press the GBL to continue)' |
11-14-2004, 03:04 PM | #54 |
Cooling Savant
Join Date: Aug 2002
Location: Croatia
Posts: 969
|
Finally managed to seal and test 'em all, everything is fine, no leaks. Here are the pics, hope I'll manage to install one set this week
__________________
'Out of cheese error... ...please reboot the universe (press the GBL to continue)' |
11-14-2004, 03:43 PM | #55 |
Cooling Neophyte
Join Date: Sep 2003
Location: Suffolk.UK
Posts: 92
|
jeez, thats sweet man, amazing work nice one!!
|
11-14-2004, 03:53 PM | #56 |
Cooling Savant
Join Date: Feb 2004
Location: Dunedin NZ
Posts: 735
|
Styling it! beautiful work
Do the flow sensors work ok?
__________________
Hypocritical Signature I tried to delete: Procooling: where scientific principles are ignored because big corporations are immune to mistakes and oversights. |
11-14-2004, 03:58 PM | #57 | |
Cooling Savant
Join Date: Mar 2002
Location: FL
Posts: 787
|
Quote:
I still remember my mom after my dad droped a bolt onto the dining room table while trying to hang a light fixture over it. Awesome project, btw. Love the flow indicator. How tall is that case?
__________________
When you do things right, people won't be sure youv'e done anything at all. Looking to buy/trade for used Deep Fryer and Vacume Pack Sealer. |
|
11-15-2004, 06:01 AM | #58 |
Cooling Savant
Join Date: Aug 2002
Location: Croatia
Posts: 969
|
Thx a lot guys
Flow indicators for now will only be visual, no wires yet, I got another one made to experiment with hall or reed, hope I'll finally get the readable signal to the mobo. LOL superart, yes, she actually sneaked on me with a digicam and took a pic while I was working there, the thing is that I vacuum clean everything after working in appartment, and never leave mess on that table (not that I wouldn't rather have a garage and leave all the tools where I can instantly find it, not needing a wrench fairy help me every time ). And ofcourse, the table is not an expensive one, so the deal was that I can work on it as long as I don't leave the mess. Fine by me The case specs are in the pic attached, I actually wanted a big server case with more room inside, but couldn't find one (affordable, used...) so I went with this one. Now I'm thinkin of better pump... Thx again guys, Cheers!
__________________
'Out of cheese error... ...please reboot the universe (press the GBL to continue)' |
11-15-2004, 04:33 PM | #59 |
Cooling Savant
Join Date: Aug 2002
Location: Croatia
Posts: 969
|
Despite the flu, still enjoyed the afternoon, making slow progress . The res and the securing bolt, it'll have to do until I figure somethin better to keep it from swinging... Took out the clearflex 60 tubing that I got more than half a year ago from frends in USA, it's pretty amazing what a simple online game (AA) can do... Redhead and Redseal decided to actually come here on vacation after they met us online, and we had a hell of a good time together. They also sent me this tubing, so THK U very very much both of you!
Back on track, took out R9800, removed the shim and tried the block. Purrfect . Dunno if the ramsinks will do any good, but I already had them, cut, sand and glue. Now I have to find some good springs to finally mount the block. Hope tomorrow I'll have some time to dismantle my current rig and put it in new case Till then, Cheers!
__________________
'Out of cheese error... ...please reboot the universe (press the GBL to continue)' |
11-15-2004, 04:45 PM | #60 |
Cooling Savant
Join Date: Mar 2002
Location: FL
Posts: 787
|
If you want something bigger, yo could try looking into those double wide server cases that are 16" across, instead of 8".
__________________
When you do things right, people won't be sure youv'e done anything at all. Looking to buy/trade for used Deep Fryer and Vacume Pack Sealer. |
11-16-2004, 01:05 PM | #61 |
Cooling Savant
Join Date: Aug 2002
Location: Croatia
Posts: 969
|
Finally installed ! Temps and quietness are great (for me), only thing I don't like is the flow and the mess the wires brought but luckily, that can be sorted out, wires will be routed and I'm thinkin of that little grundfos pump. Also, the fan 'controller' (12V/7V/5V) will be made and installed as soon as I find some more time. Haaaaaappppyyyyyyyy
__________________
'Out of cheese error... ...please reboot the universe (press the GBL to continue)' |
12-28-2004, 09:23 AM | #62 |
Cooling Savant
Join Date: Aug 2002
Location: Croatia
Posts: 969
|
by req
Here's the zipped .cdr of all three blocks, have lots of fun!
__________________
'Out of cheese error... ...please reboot the universe (press the GBL to continue)' |
03-30-2006, 01:58 AM | #63 |
Cooling Savant
Join Date: Oct 2001
Location: Dallas, Tx
Posts: 469
|
Re: Chieftec big tower wc'ing in progress
Man that is a whole lot of work that went into that system. Hell when you've got all that room why not? Wonderful stuff. Be sure to post up some pics of everything when you get the wires and everything squared away.
Shane |
04-09-2006, 02:45 PM | #64 |
Cooling Savant
Join Date: Aug 2002
Location: Croatia
Posts: 969
|
Re: Chieftec big tower wc'ing in progress
Wow, this stuff is OLD
Thx for the kind words, , the rig still looks the same on the outside, inside is A64 3200, DFI lanparty NF4 ultra D and R850XT, and only radeon is watercooled for now. Gotta find some time to make new blocks for CPU and chipset. But have a baby coming very soon so I don't believe I'll have a free time in next few months... And the pump became a bit noisy, so I'll have to look for a new one (obtainable here). Still lurkin' but don't have much to say , so glad that the site is still among the best Cheers D
__________________
'Out of cheese error... ...please reboot the universe (press the GBL to continue)' |
02-02-2008, 10:08 AM | #65 |
Cooling Neophyte
Join Date: Dec 2005
Location: israel
Posts: 5
|
Re: Chieftec big tower wc'ing in progress
awesome job.
|
02-03-2008, 12:33 PM | #66 |
Uber Pro/Mods
Join Date: Aug 2007
Location: New Hampshire (USA) Posts: Two hundred somethin
Posts: 432
|
Re: Chieftec big tower wc'ing in progress
holy old thread batman! (again) hehe... This was a nice one
__________________
Pro Slacker
|
04-02-2008, 03:34 PM | #67 |
Cooling Savant
Join Date: Aug 2002
Location: Croatia
Posts: 969
|
Re: Chieftec big tower wc'ing in progress
Thx LOLLLL
Still lurking, now aircooled, and water only in my reef tank LOLL Just re-read the thread, man that was FUN
__________________
'Out of cheese error... ...please reboot the universe (press the GBL to continue)' |
04-02-2008, 06:23 PM | #68 |
Uber Pro/Mods
Join Date: Aug 2007
Location: New Hampshire (USA) Posts: Two hundred somethin
Posts: 432
|
Re: Chieftec big tower wc'ing in progress
DO IT AGAIN Please
__________________
Pro Slacker
|
04-26-2008, 05:32 PM | #69 | |
Cooling Savant
Join Date: Apr 2000
Location: Bremerton, WA
Posts: 514
|
Re: Chieftec big tower wc'ing in progress
Quote:
__________________
The UnaClocker Watercooler Extraordinaire! Overclock till it goes BOOM! |
|
05-05-2008, 07:21 AM | #70 |
Cooling Neophyte
Join Date: May 2008
Location: South Africa
Posts: 10
|
What is the thichness of the copper?
I would like more details on the waterblocks but can't download your files ,help please.So far you have done an amazing job with the tools that you have - GREAT STUFF!!!!!!!!!!!!!!!!!!!!!!!!!! Why don't you use a single piece/layer of perspex,lexan ? Last edited by ben333; 05-05-2008 at 04:24 PM. Reason: tripple post cleaned into a single post |
05-06-2008, 12:12 PM | #71 |
Cooling Savant
Join Date: Aug 2002
Location: Croatia
Posts: 969
|
Re: Chieftec big tower wc'ing in progress
Ben, Una - thk u for tryin to get me into that again, but ... gotta 2 yr old son that loves to spend my free time, and vice versa , the copper and the tools will wait a bit more
And, whats the point of makeing a WB for socket 939 LOL RM5D - thx The copper is 5 mm thick, and 4 yrs ago I simply couldnt find lexan here at all, a member of this forum sent me a nice piece of 1/2" by mail (big thx again BlackEagle ), thats the reason why I did the sandwich top for Radeon Ill try to dig out the .cdr files of the blocks, gotta be somewhere on backup CDs, but cannot promise you how soon LOLL, gotta find those CDs first
__________________
'Out of cheese error... ...please reboot the universe (press the GBL to continue)' |
05-06-2008, 01:36 PM | #72 |
Cooling Neophyte
Join Date: May 2008
Location: South Africa
Posts: 10
|
Re: Chieftec big tower wc'ing in progress
Thanx for coming back,not to worry about the files after spending a few hours on this forum reading your and other members posts, I am alot more enlightend.I can sypathaze with because in this country it is not always easy to find things either and if you do they cost a fortune.
Thanx again. |
05-07-2008, 02:46 PM | #73 |
Uber Pro/Mods
Join Date: Aug 2007
Location: New Hampshire (USA) Posts: Two hundred somethin
Posts: 432
|
Re: Chieftec big tower wc'ing in progress
Una has two little ones and is starting a project I remember seeing your old rig a while ago... http://forums.procooling.com/vbb/showthread.php?t=4104 That was friggin awesome
__________________
Pro Slacker
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|