GPU+RAM peltier cooled 9600XT

JFettig · 01-31-2005, 06:01 PM

Hey guys, I got a built by ATI 9600XT that I have peltier cooled the RAM and GPU, at 600mhz on GPU it typically idles around -4c and full load at around 2-4C above zero.
I havent gone nutso on overclocking it, I did it for fun,
http://www.ocforums.com/showthread.php?t=346188
Here is the thread that I have started, I have 3/8" OD pushfits on it and it can be easily fitted for 1/2" barbs
I will be including a few peices of insulation as The capacitors and pcb on the edge gets quite cold and in a more moist enviroment it could condense.
The voltage chips(for volt modding) are under a little bit of insulation, not a big deal, I already pealed it back once.
The peltier I have on it is around 72w, not totally sure, could be more, could be less, for extreme cooling a 172w could be put on at 12v and it would cool better than this guy.

I want $165 shippedfor it or I would be interested in trading for another video card(I prefer actually) or a LCD monitor.

my e-mail address is jonfettig@wc101.com or pm me.
Jon

snowwie · 01-31-2005, 06:26 PM

cool...i have considered cooling the mem chips on my 9600XT...they get pretty warm

but i figure i should just spend the 10 bucks on those small alu heatsinks

sub-ambient is something i am just not ready for on an everyday machine, and i don't have enough money to bench

JFettig · 02-03-2005, 03:09 PM

Bump and price drop

JFettig · 02-13-2005, 10:32 AM

No interest?

obobski · 02-25-2005, 12:18 AM

what are your benchmarks?
$165 is quite a bit for a 9600XT...when a 6600nU for PCIE can be had for $135, and a 6600GT for AGP is only $190...$165 is quite a bit for that...so how does it bench?

jaydee · 02-25-2005, 12:31 AM

Quote:

Originally Posted by obobski

what are your benchmarks?
$165 is quite a bit for a 9600XT...when a 6600nU for PCIE can be had for $135, and a 6600GT for AGP is only $190...$165 is quite a bit for that...so how does it bench?

Maybe just for the card alone. The Pelt block assembly is worth over half that $165 IMO. Question is can the pelt assembly fit on a X800 line if the buyer were to upgrade later and transfer the assembly over? Not interested myself though as I would make my own if needed.

Nice work Jon.

JFettig · 02-25-2005, 07:56 AM

obobski, I havent benchmarked it much becuase I dont have a power supply decent enough to handle much for overclocking with all the rest of my hardware. Right now I took off the peltier cooler and all and will probably just keep it. If I was to find out that the dimentions were the same on another card, I would sell the cold plate.

Jon

01-31-2005, 06:01 PM	#1
JFettig Cooling Savant Join Date: Feb 2003 Location: Willmar MN/Fargo ND Posts: 504	GPU+RAM peltier cooled 9600XT Hey guys, I got a built by ATI 9600XT that I have peltier cooled the RAM and GPU, at 600mhz on GPU it typically idles around -4c and full load at around 2-4C above zero. I havent gone nutso on overclocking it, I did it for fun, http://www.ocforums.com/showthread.php?t=346188 Here is the thread that I have started, I have 3/8" OD pushfits on it and it can be easily fitted for 1/2" barbs I will be including a few peices of insulation as The capacitors and pcb on the edge gets quite cold and in a more moist enviroment it could condense. The voltage chips(for volt modding) are under a little bit of insulation, not a big deal, I already pealed it back once. The peltier I have on it is around 72w, not totally sure, could be more, could be less, for extreme cooling a 172w could be put on at 12v and it would cool better than this guy. I want $165 shippedfor it or I would be interested in trading for another video card(I prefer actually) or a LCD monitor. my e-mail address is jonfettig@wc101.com or pm me. Jon Last edited by JFettig; 02-03-2005 at 03:09 PM.

01-31-2005, 06:26 PM	#2
snowwie Cooling Savant Join Date: Mar 2003 Location: New Jersey Posts: 154	cool...i have considered cooling the mem chips on my 9600XT...they get pretty warm but i figure i should just spend the 10 bucks on those small alu heatsinks sub-ambient is something i am just not ready for on an everyday machine, and i don't have enough money to bench

02-03-2005, 03:09 PM	#3
JFettig Cooling Savant Join Date: Feb 2003 Location: Willmar MN/Fargo ND Posts: 504	Bump and price drop

02-13-2005, 10:32 AM	#4
JFettig Cooling Savant Join Date: Feb 2003 Location: Willmar MN/Fargo ND Posts: 504	No interest?

02-25-2005, 12:18 AM	#5
obobski Cooling Neophyte Join Date: Feb 2005 Location: USA Posts: 5	what are your benchmarks? $165 is quite a bit for a 9600XT...when a 6600nU for PCIE can be had for $135, and a 6600GT for AGP is only $190...$165 is quite a bit for that...so how does it bench?

02-25-2005, 07:56 AM	#7
JFettig Cooling Savant Join Date: Feb 2003 Location: Willmar MN/Fargo ND Posts: 504	obobski, I havent benchmarked it much becuase I dont have a power supply decent enough to handle much for overclocking with all the rest of my hardware. Right now I took off the peltier cooler and all and will probably just keep it. If I was to find out that the dimentions were the same on another card, I would sell the cold plate. Jon

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)