FS Watercooling | MCW6002 and Dtek ProCore w/Shroud and Fan

[Senater_Cache]

I am installing my new block and my new core so this stuff is up for grabs.

I ran the equipment with 90% distilled and 10% Swiftech HydriX for 4 months.
The rad and block have been flushed and internally cleansed with vinegar.
Upon arrival you may want to flush the parts again for dust or whatever may sneak inside during shipping.
Everything is Leak-free.
here are the goods:

_Swiftech MCW6002 stepped base.(for 1/2 inch setup). $38 shipped
comes with complete mounting harness for Socket A in original Box with manual.
for additional harnesses please visit swiftnets.com direct links are here: A64 and LGA775
Block has no scratches or dents. It does have some minor tarnishing which is harmless.

_Dtek 120mm ProCore (JR120) Black finish from Dtek. $45 shipped
Has flanged 1/2 inch Chromed barbs installed by Dtek.
This core has no noticable bent fins and is virtually scratch-free except for two tiny scratches in the paint on the underside of the bottom tank.
This heatercore comes with a custom Tin-Shroud for one 120mm fan made by Greenman100. I will provide the rest of my neoprene gasketing. It also comes with a 120mm Evercoole aluminum fan installed with mounting rods (not through-core)

I can provide limited amounts of 1/2"ID Cleaflex60 and 7/16" ID Masterkleer...PM me about pricing/options

BUNDLE PRICE = $70 shipped
I will consider other offers via PM.

here are pictures:





COMPATIBILITY= This MCW6002 is compatible with the following Sockets/processors using their respective mounting brackets available at swiftnets.com:
Socket462 (A-XP, Duron, AthlonMP, Sempron) this bracket is included)
Socket478 (P4 series on this socket)
Socket775 (P4 series on this socket)

This block will not mount on Athlon64 series or Xeon sereis without possible complication.