The Scythe SCKTN-1000 Katana

stev · 12-01-2005, 12:01 PM

After seeing the VapoChill Micro ThermoSiphon roll out this past summer, Scythe has started out recently in Asia with the Katana 1000.

Basically, it's the same foot-print as the Micro, but in a heat-pipe kind of way.

Performance? I can't read Asian script.

The only English I've found is:

CPU: Intel 370/478/775/ all Xeon's, AMD 462/754/939/940.
Heat-pipe fin area: 98x96x130 (very much the same as Micro)
Fan: 92x92x25 / 2000rpm / 25dBA / 35.12CFM (like the Micro)
Weight: 300g (55g less than Micro)

Price: 2,800 Yen / $30 Euro / $33USD

Only time will tell if this product is successful and comes to the shores of North America.

Joe · 12-01-2005, 12:23 PM

$33.00 US seems good if its a solid product

I order R/C stuff from Hong Kong and Tokyo all the time, its not hard to get stuff from Asia over here.

stev · 12-05-2005, 03:21 PM

A review will be out soon. Bio-Hazard has been busy with it.

I'm not sure what's been written, but I'll post the link here when the review gets out.

Stev

wildfrogman1 · 03-12-2006, 04:40 AM

Any word on the copper version's performance? I've seen few reviews sofar on it. Performance seems very good though.

Colt357tw · 04-09-2006, 01:04 PM

This one actually performs pretty impressive. I am using the Al version in my 2.3G 3200+ with a 1500 rpm fan.

Since the fin gaps are wider than SI/XP series HSF, this one would perform way better when combine with slower fan.

Mr. Tinker · 04-11-2006, 08:27 AM

It's nice a lightweight, and since you can mount it in any direction, you angle it up to take better advantage of the heatpipes. I really think that makes a difference. Great product for the price.

I'd like to see test on the copper version and how mounting in different directions influences cooling capacity.

Here's the SPCR Review: http://www.silentpcreview.com/article271-page1.html

12-01-2005, 12:01 PM	#1
stev Cooling Neophyte Join Date: Feb 2005 Location: niagara falls Posts: 96	The Scythe SCKTN-1000 Katana After seeing the VapoChill Micro ThermoSiphon roll out this past summer, Scythe has started out recently in Asia with the Katana 1000. Basically, it's the same foot-print as the Micro, but in a heat-pipe kind of way. Performance? I can't read Asian script. The only English I've found is: CPU: Intel 370/478/775/ all Xeon's, AMD 462/754/939/940. Heat-pipe fin area: 98x96x130 (very much the same as Micro) Fan: 92x92x25 / 2000rpm / 25dBA / 35.12CFM (like the Micro) Weight: 300g (55g less than Micro) Price: 2,800 Yen / $30 Euro / $33USD Only time will tell if this product is successful and comes to the shores of North America.

12-01-2005, 12:23 PM	#2
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Re: The Scythe SCKTN-1000 Katana $33.00 US seems good if its a solid product I order R/C stuff from Hong Kong and Tokyo all the time, its not hard to get stuff from Asia over here. __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

12-05-2005, 03:21 PM	#3
stev Cooling Neophyte Join Date: Feb 2005 Location: niagara falls Posts: 96	Re: The Scythe SCKTN-1000 Katana A review will be out soon. Bio-Hazard has been busy with it. I'm not sure what's been written, but I'll post the link here when the review gets out. Stev

03-12-2006, 04:40 AM	#4
wildfrogman1 Cooling Neophyte Join Date: Mar 2006 Location: Usa Posts: 6	Re: The Scythe SCKTN-1000 Katana Any word on the copper version's performance? I've seen few reviews sofar on it. Performance seems very good though.

04-09-2006, 01:04 PM	#5
Colt357tw Cooling Neophyte Join Date: Jun 2004 Location: Taiwan Posts: 55	Re: The Scythe SCKTN-1000 Katana This one actually performs pretty impressive. I am using the Al version in my 2.3G 3200+ with a 1500 rpm fan. Since the fin gaps are wider than SI/XP series HSF, this one would perform way better when combine with slower fan.

04-11-2006, 08:27 AM	#6
Mr. Tinker Cooling Neophyte Join Date: Oct 2005 Location: Mission, KS Posts: 12	Re: The Scythe SCKTN-1000 Katana It's nice a lightweight, and since you can mount it in any direction, you angle it up to take better advantage of the heatpipes. I really think that makes a difference. Great product for the price. I'd like to see test on the copper version and how mounting in different directions influences cooling capacity. Here's the SPCR Review: http://www.silentpcreview.com/article271-page1.html

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)