My water cooler.

DoeBoy · 07-16-2001, 03:08 PM

I am planning on getting a Maze2 from dangerden and an aquacoil(maybe the copper cube but I haven't decided) and most likely an eheim 1250....proabably a nice big fat 120mm panaflo fan on the radiator. What do yall think? Any suggestions or comments on any of this stuff?

GuyBFF · 07-16-2001, 11:37 PM

Sounds premium.

Also consider 1/2" tubing, the BE aquacoil will accept, the Maze 2 is available for no charge, and the Eheim 1250 has one 1/2" fitting and one 5/8" fitting. You'll need a 1/2" to 5/8" barb and a couple inches of 5/8" hose (Danger Den says 3/8" / 5/8" but there refering to "stretching" silicon hose over the fittings).

Also can you fit a Big Momma or D-Tek Cooler Core (the heater core style units). There 6x7 and the Big Momma is 49.99 + 5.00 to get 1/2", or the D-Tek is 42.99 with 1/2" (it's the newcomer). These tend to cool better, but you'll have more work mounting and constructing a fan shroud.

Between Danger Den Cube and BE Aquacoil, take Aquacoil. More fins, bigger and the flow has been split into two paths so its not a big restriction like the DD Cube.

07-16-2001, 03:08 PM	#1
DoeBoy Cooling Neophyte Join Date: Jul 2001 Posts: 7	My water cooler. I am planning on getting a Maze2 from dangerden and an aquacoil(maybe the copper cube but I haven't decided) and most likely an eheim 1250....proabably a nice big fat 120mm panaflo fan on the radiator. What do yall think? Any suggestions or comments on any of this stuff?

07-16-2001, 11:37 PM	#2
GuyBFF Cooling Savant Join Date: Jun 2001 Location: Winnipeg, MB, CA Posts: 242	Sounds premium. Also consider 1/2" tubing, the BE aquacoil will accept, the Maze 2 is available for no charge, and the Eheim 1250 has one 1/2" fitting and one 5/8" fitting. You'll need a 1/2" to 5/8" barb and a couple inches of 5/8" hose (Danger Den says 3/8" / 5/8" but there refering to "stretching" silicon hose over the fittings). Also can you fit a Big Momma or D-Tek Cooler Core (the heater core style units). There 6x7 and the Big Momma is 49.99 + 5.00 to get 1/2", or the D-Tek is 42.99 with 1/2" (it's the newcomer). These tend to cool better, but you'll have more work mounting and constructing a fan shroud. Between Danger Den Cube and BE Aquacoil, take Aquacoil. More fins, bigger and the flow has been split into two paths so its not a big restriction like the DD Cube. __________________ A7V8X Danger Den Maze II Danner Mag Drive 350 Heater Core Style Rad Thunderbird 1400 (Soon Barton) 512mb PC2700 CL2 Promise SX4000 Raid 5 w/256mb PC133 Cache 4x40gb Western Digital 7200hdd Plus More...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)