DDC-2TPMP mounting (NOT 56K friendly)!

SiGfever · 08-31-2006, 08:26 PM

This new feature from Mountain Mods where they attach brackets to any 120mm fan to hold three hard drives works perfect for holding the modded pump in front of my case fan. I have a Yate Loon running at full volts blowing air directly at the back of the pump where I installed some heat sinks to help cool the pump motor. The fill-port in the res is just for bleeding and will be removed when finished (it is the delrin model from DD).

I still have some wire management in the background to take care of so please just ignore it.

Brians256 · 09-01-2006, 12:30 PM

Nifty looking setup. I especially like that airtrap/reservoir. It is mounted vertically instead of horizontally like those 5.25" bay reservoirs.

SiGfever · 09-01-2006, 04:01 PM

Thanks.

It is the Swiftech Micro-Res and that little res does one heck of a great job. It blleds fast and is very quiet.

bigben2k · 09-04-2006, 02:23 PM

Wow, I completely missed that product coming out!

http://www.swiftnets.com/products/MCRES-micro.asp

SiGfever · 09-04-2006, 02:37 PM

Quote:

Originally Posted by bigben2k

Wow, I completely missed that product coming out!

http://www.swiftnets.com/products/MCRES-micro.asp

I have the...

http://www.performance-pcs.com/catal...oducts_id=3615

with the G1/4 top plug option. They work great!

08-31-2006, 08:26 PM	#1
SiGfever Cooling Neophyte Join Date: May 2006 Location: Virginia, USA Posts: 53	DDC-2TPMP mounting (NOT 56K friendly)! This new feature from Mountain Mods where they attach brackets to any 120mm fan to hold three hard drives works perfect for holding the modded pump in front of my case fan. I have a Yate Loon running at full volts blowing air directly at the back of the pump where I installed some heat sinks to help cool the pump motor. The fill-port in the res is just for bleeding and will be removed when finished (it is the delrin model from DD). I still have some wire management in the background to take care of so please just ignore it. __________________ U2-UFO; Corsair HX620W; Q6600 "GO" (L723A) vid=1.2125v @3.61Ghz 1.32v; P5K Premium; Ballistix 6400c4 4x1Gb; eVga eGeforce 7600GT KO 256mb; Samsung 245BW; Klipsch Promedia 2.1; FuZion; DDC-2 w/ AlphaCool top; PA120.3 rad_push/pull; 7/16" Tubing. (In progress) MCW30; EK Asus3a Acetal Mosfet; MCX159-CU; MCR220; 3/8" tubing. Sigmund Freud said..."Failure to CRUNCH is a sign of Sexual Inadequacies".

09-01-2006, 12:30 PM	#2
Brians256 Pro/Staff Join Date: Oct 2001 Location: Klamath Falls, OR Posts: 1,439	Re: DDC-2TPMP mounting (NOT 56K friendly)! Nifty looking setup. I especially like that airtrap/reservoir. It is mounted vertically instead of horizontally like those 5.25" bay reservoirs.

09-01-2006, 04:01 PM	#3
SiGfever Cooling Neophyte Join Date: May 2006 Location: Virginia, USA Posts: 53	Re: DDC-2TPMP mounting (NOT 56K friendly)! Thanks. It is the Swiftech Micro-Res and that little res does one heck of a great job. It blleds fast and is very quiet. __________________ U2-UFO; Corsair HX620W; Q6600 "GO" (L723A) vid=1.2125v @3.61Ghz 1.32v; P5K Premium; Ballistix 6400c4 4x1Gb; eVga eGeforce 7600GT KO 256mb; Samsung 245BW; Klipsch Promedia 2.1; FuZion; DDC-2 w/ AlphaCool top; PA120.3 rad_push/pull; 7/16" Tubing. (In progress) MCW30; EK Asus3a Acetal Mosfet; MCX159-CU; MCR220; 3/8" tubing. Sigmund Freud said..."Failure to CRUNCH is a sign of Sexual Inadequacies".

09-04-2006, 02:23 PM	#4
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	Re: DDC-2TPMP mounting (NOT 56K friendly)! Wow, I completely missed that product coming out! http://www.swiftnets.com/products/MCRES-micro.asp __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)