|
|
Hardware and Case Mod's You Paint it, Cut it, Solder it, bend it, light it up, make it glow or anything like that, here is your forum. |
Thread Tools |
08-23-2003, 07:23 PM | #76 |
Been /.'d... have you?
Join Date: Jul 2002
Location: Moscow, ID
Posts: 1,986
|
Za weezils:
__________________
#!/bin/sh {who;} {last;} {pause;} {grep;} {touch;} {unzip;} mount /dev/girl -t {wet;} {fsck;} {fsck;} {fsck;} {fsck;} echo yes yes yes {yes;} umount {/dev/girl;zip;} rm -rf {wet.spot;} {sleep;} finger: permission denied |
08-23-2003, 07:24 PM | #77 |
Been /.'d... have you?
Join Date: Jul 2002
Location: Moscow, ID
Posts: 1,986
|
I'm happy witht the results. I'm hooking it to my machine right now and I'm going to leave it between my monitors as pictured. This is a very handy piece of equipment. Thanks for the tip, TK!
Edit: The pix are now registering data from my machine, if anyone cares.
__________________
#!/bin/sh {who;} {last;} {pause;} {grep;} {touch;} {unzip;} mount /dev/girl -t {wet;} {fsck;} {fsck;} {fsck;} {fsck;} echo yes yes yes {yes;} umount {/dev/girl;zip;} rm -rf {wet.spot;} {sleep;} finger: permission denied Last edited by airspirit; 08-23-2003 at 08:27 PM. |
08-23-2003, 09:09 PM | #78 |
Responsible for 2%
of all the posts here. Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
|
Nice one Airspirit.
|
08-24-2003, 04:25 AM | #79 | |
Cooling Savant
Join Date: May 2001
Location: Brussels - Belgium
Posts: 232
|
Quote:
LOL, easy when you reply too late. CD
__________________
My website: http://www.turbokeu.com Backup website: http://www2.turbokeu.com My company: http://www.kdcs.be |
|
08-24-2003, 04:41 AM | #80 |
Cooling Savant
Join Date: May 2001
Location: Brussels - Belgium
Posts: 232
|
Very nice work Airspirit, welcome to the club of graphical LCD owners!
Is that LCDstudio? I'm messing around a little with it and it seems a nice package. Can you tell me wich CPU temp it indicates? (socket or diode temp). In MBM it have both temps but PowerLCD only displays the socket temp. Also, did you receive some supplemental specs (typical forward current) about the backlight requirements with the LCD? Is the backlight quite luminous? With the right specs we could adapt the serial 12 Ohm resistor and the LCD's luminosity to the right value. BTW, nice "weezils"... CD
__________________
My website: http://www.turbokeu.com Backup website: http://www2.turbokeu.com My company: http://www.kdcs.be |
08-24-2003, 01:57 PM | #81 |
Been /.'d... have you?
Join Date: Jul 2002
Location: Moscow, ID
Posts: 1,986
|
It is reporting socket temp in that picture. Neither the NF7-S or the 8RGA+ will report diode temp to MBM ... they just use it for overtemp protection. If MBM can read it, though, LCDStudio can output it. The LCD specs can be found here:
http://www.lcdmodkit.com/sheet/lkg240128a2ds01.pdf My 5V PSU is now putting out 5V rather than 5.2. Good times .... The LEDs aren't the brightest in the world, but they work fine for what I need them for.
__________________
#!/bin/sh {who;} {last;} {pause;} {grep;} {touch;} {unzip;} mount /dev/girl -t {wet;} {fsck;} {fsck;} {fsck;} {fsck;} echo yes yes yes {yes;} umount {/dev/girl;zip;} rm -rf {wet.spot;} {sleep;} finger: permission denied |
08-24-2003, 04:49 PM | #82 | |
Cooling Savant
Join Date: May 2001
Location: Brussels - Belgium
Posts: 232
|
Quote:
Still no "real" specs about the BL, what the heck, it's working... Your PSU is is right in spec, fine. Have fun, CD
__________________
My website: http://www.turbokeu.com Backup website: http://www2.turbokeu.com My company: http://www.kdcs.be |
|
08-24-2003, 05:00 PM | #83 |
Cooling Savant
Join Date: May 2001
Location: Brussels - Belgium
Posts: 232
|
Finally finished...
OK, finally cut my Lian PC-70 window, used the resting alu to cut the frame for my LCD:
After the finishing touch (filing, sanding) here's the result: Again, some pics with the frame mounted: (In the meanwhile I made some skins for PowerLCD) CD
__________________
My website: http://www.turbokeu.com Backup website: http://www2.turbokeu.com My company: http://www.kdcs.be |
08-24-2003, 05:47 PM | #84 |
Been /.'d... have you?
Join Date: Jul 2002
Location: Moscow, ID
Posts: 1,986
|
That is cool ... I think I like the "robo/geek" look of mine without a front frame. I'm kind of strange that way, though.
I still haven't heard from Chronom about the errors in PLCD2 yet ... maybe it wasn't as easy a fix as he thought? It could be that it just doesn't agree with my hardware ... who knows?
__________________
#!/bin/sh {who;} {last;} {pause;} {grep;} {touch;} {unzip;} mount /dev/girl -t {wet;} {fsck;} {fsck;} {fsck;} {fsck;} echo yes yes yes {yes;} umount {/dev/girl;zip;} rm -rf {wet.spot;} {sleep;} finger: permission denied |
08-25-2003, 04:45 AM | #85 |
Cooling Savant
Join Date: May 2001
Location: Brussels - Belgium
Posts: 232
|
Yeepie! Just (pre)ordered my white on blue 320x240 pixel LCD with SED1335 controller from ModwareHouse ...
CD
__________________
My website: http://www.turbokeu.com Backup website: http://www2.turbokeu.com My company: http://www.kdcs.be |
11-18-2008, 02:00 AM | #86 |
Cooling Neophyte
Join Date: Nov 2008
Location: italy
Posts: 7
|
Re: My graphical LCD
Hy Mr. TurboKeu i have connect my asi-c-240128bs-kj-fw lcd to parallel port 25pin but lcdstudio don't work fine. Pin connection are:
1 VSS GROUND 2 VDD POWER (+5V) 3 V0 Power Supply FOR LCD DRIVER 4 C/D H/L WR=L, C/D=H; COMMAND WRITE C/D=LATA WRITE RD=L, C/D=H, STATUS READ C/D=LATA READ 5 RD L Data read. Read data from T6963C when RD = L 6 WR L Data write. Write data from T6963C when WR = L 7 DB0 H/L Data bus line 8 DB1 H/L Data bus line 9 DB2 H/L Data bus line 10 DB3 H/L Data bus line 11 DB4 H/L Data bus line 12 DB5 H/L Data bus line 13 DB6 H/L Data bus line 14 DB7 H/L Data bus line 15 CE L L: CHIP ENABLE 16 RESET H/L H: NORMAL; L: INITIALIZE T6963C 17 Vee NEGATIVE VOLTAGE OUTPUT (-16V) 18 MD2 H/L H: 32 COLUMNS; L: 40 COLUMNS 19 FS H/L Pins for selection of font ; H: 6 * 8, L : 8 * 8 20 N.C. I have not powerlcd can you help me? thanks |
11-18-2008, 02:07 AM | #87 |
Cooling Neophyte
Join Date: Nov 2008
Location: italy
Posts: 7
|
Re: My graphical LCD
Hy Mr. TurboKeu i have connect my asi-c-240128bs-kj-fw lcd to parallel port 25pin but lcdstudio don't work fine. Pin connection are:
1 VSS GROUND 2 VDD POWER (+5V) 3 V0 Power Supply FOR LCD DRIVER 4 C/D H/L WR=L, C/D=H; COMMAND WRITE C/D=LATA WRITE RD=L, C/D=H, STATUS READ C/D=LATA READ 5 RD L Data read. Read data from T6963C when RD = L 6 WR L Data write. Write data from T6963C when WR = L 7 DB0 H/L Data bus line 8 DB1 H/L Data bus line 9 DB2 H/L Data bus line 10 DB3 H/L Data bus line 11 DB4 H/L Data bus line 12 DB5 H/L Data bus line 13 DB6 H/L Data bus line 14 DB7 H/L Data bus line 15 CE L L: CHIP ENABLE 16 RESET H/L H: NORMAL; L: INITIALIZE T6963C 17 Vee NEGATIVE VOLTAGE OUTPUT (-16V) 18 MD2 H/L H: 32 COLUMNS; L: 40 COLUMNS 19 FS H/L Pins for selection of font ; H: 6 * 8, L : 8 * 8 20 N.C. I have not powerlcd can you help me? thanks |
11-18-2008, 03:34 AM | #88 | |
Cooling Savant
Join Date: Jun 2005
Location: Skokie, Illinois
Posts: 322
|
Re: My graphical LCD
Quote:
See http://www.turbokeu.com/
__________________
My new rig.... Intel SE440BX-3, PIII 550 (@ 680) MX440 275/332 (@ 350/400) and 3DFX Voodo 5 5500 160/160 (@180/180) Two Opticals and 120 gigs (w/28gigs in RAID0) on 4 Maxstors |
|
11-20-2008, 06:13 AM | #89 |
Cooling Neophyte
Join Date: Nov 2008
Location: italy
Posts: 7
|
Re: My graphical LCD
Hy can you post software powerlcd for me? lcdstudio don't work fine
thank you very much |
11-21-2008, 05:35 AM | #90 |
Cooling Neophyte
Join Date: Nov 2008
Location: italy
Posts: 7
|
Re: My graphical LCD
Hy, I have powerlcd and now my lcd work!
|
12-01-2008, 01:14 PM | #91 |
Cooling Neophyte
Join Date: Nov 2008
Location: italy
Posts: 7
|
Re: My graphical LCD
Hy this is my lcd
|
12-01-2008, 08:10 PM | #92 |
Uber Pro/Mods
Join Date: Aug 2007
Location: New Hampshire (USA) Posts: Two hundred somethin
Posts: 432
|
Re: My graphical LCD
Hehe very nice! Bill is right though, this is an old thread. Feel free to make your own
Welcome to ProCooling!
__________________
Pro Slacker
|
12-03-2008, 02:00 PM | #93 |
Cooling Neophyte
Join Date: Nov 2008
Location: italy
Posts: 7
|
Re: My graphical LCD
Thank you, I have any question, why my lcd 240x128 t6963c controller work with powerlcd v1.1 and don't work with lcdstudio v2.0 beta, i have installed microsoft .net framework 2.0.
help me!! |
12-04-2008, 12:47 PM | #94 |
Cooling Neophyte
Join Date: Nov 2008
Location: italy
Posts: 7
|
Re: My graphical LCD
I have the solution my cable was long, now I use a short cable and lcdstudio work.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
|
|