SILVRETTA Watercooling Kit

CoolDuke · 03-08-2002, 03:50 PM

Hi, the new water cooler " SILVRETTA " shall be seen on the CeBit in Hannover (Germany) from the 13/03/02:-) here already a picture of the KIT

--------> TIGER-Electronics

Brad · 03-08-2002, 08:11 PM

the rad and waterblock look a little small, but the res and pump look good

jaydee · 03-09-2002, 09:07 AM

Need better pics and a HELL of a lot more info on each part of the kit. Hard to say anything from that pic. Other than that it looks interesting.

iceheart · 03-09-2002, 09:35 AM

Looks like really small hose too.

Joe · 03-09-2002, 10:35 AM

something about them germans and tiny hoses.... weird

Brad · 03-09-2002, 04:45 PM

yeah good point Joe, all the germans seem to like small hoses

mx-6* · 03-09-2002, 07:05 PM

If it cools just as good, why not.

What is the best block from Germany, anyway?

Brad · 03-09-2002, 07:22 PM

probably the innovatek

Fixittt · 03-09-2002, 07:36 PM

Is that a tidal pool block variant I see there?

hey that would be a good cooling sytem for a mini tower project

mx-6* · 03-09-2002, 07:46 PM

Innovatech?

I've seen their block for sale somewhere. I think it was pretty high just for the block.

Brad · 03-09-2002, 08:34 PM

pHaestus seems to like their blocks a lot, maybe you should ask him

mx-6* · 03-09-2002, 10:29 PM

Yeah that would be funny, use a 1/4 inch block on a 1/2 inch setup.

jaydee · 03-09-2002, 10:43 PM

Quote:

Originally posted by mx-6*
Yeah that would be funny, use a 1/4 inch block on a 1/2 inch setup.

Hummm, sounds like the Z4 with 1/2" barbs!!!

Fixittt · 03-09-2002, 11:40 PM

well if U made a pocket on the under the inlet bard, a little over 1/2 in that would allow a res of sorts to allow for more water in the block, and would also help speed the water movement inside the block ( I beleive)

03-08-2002, 03:50 PM	#1
CoolDuke Cooling Neophyte Join Date: Feb 2002 Posts: 2	SILVRETTA Watercooling Kit Hi, the new water cooler " SILVRETTA " shall be seen on the CeBit in Hannover (Germany) from the 13/03/02:-) here already a picture of the KIT --------> TIGER-Electronics

03-08-2002, 08:11 PM	#2
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	the rad and waterblock look a little small, but the res and pump look good __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

03-09-2002, 10:35 AM	#5
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	something about them germans and tiny hoses.... weird __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

03-09-2002, 04:45 PM	#6
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	yeah good point Joe, all the germans seem to like small hoses __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

03-09-2002, 07:22 PM	#8
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	probably the innovatek __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

03-09-2002, 09:07 AM	#3
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Need better pics and a HELL of a lot more info on each part of the kit. Hard to say anything from that pic. Other than that it looks interesting.

03-09-2002, 09:35 AM	#4
iceheart Cooling Savant Join Date: Mar 2001 Location: Yonder Posts: 318	Looks like really small hose too.

03-09-2002, 07:05 PM	#7
mx-6* Cooling Savant Join Date: Feb 2002 Posts: 165	If it cools just as good, why not. What is the best block from Germany, anyway?

03-09-2002, 07:36 PM	#9
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	Is that a tidal pool block variant I see there? hey that would be a good cooling sytem for a mini tower project __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808

03-09-2002, 07:46 PM	#10
mx-6* Cooling Savant Join Date: Feb 2002 Posts: 165	Innovatech? I've seen their block for sale somewhere. I think it was pretty high just for the block.

03-09-2002, 08:34 PM	#11
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	pHaestus seems to like their blocks a lot, maybe you should ask him __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

03-09-2002, 10:29 PM	#12
mx-6* Cooling Savant Join Date: Feb 2002 Posts: 165	Yeah that would be funny, use a 1/4 inch block on a 1/2 inch setup.

03-09-2002, 11:40 PM	#14
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	well if U made a pocket on the under the inlet bard, a little over 1/2 in that would allow a res of sorts to allow for more water in the block, and would also help speed the water movement inside the block ( I beleive) __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)