A good glue that transfear heat well?

the creature · 03-12-2002, 10:33 AM

What glue should I use? It should be possible to remove what I glued later, without put it in the freezer.

cybrsamurai · 03-12-2002, 11:20 AM

I use artic silver thermal adhesive mixed with a small amount of artic silver. It transfers heat well and bonds fairly well depending on how much AS you mix with the adhesive.

http://www.articsilver.com/arctic_si...l_adhesive.htm

Brad · 03-12-2002, 02:08 PM

you can use AS Alumina Epoxy as well, which doesn't conduct electricity, transfers heat really well, and bonds like normal epoxy

RedTalon19 · 03-12-2002, 04:13 PM

i also recommend acrtic silver epoxy of some sort wheater its the origianl or the alumina stuff.

if you want to be able to remove it with ease later on just add some regular acrtic silver thermal paste into the mix

ksw · 03-16-2002, 02:35 PM

superglue and AS III is a good combo 2/8 mix

UnaClocker · 03-17-2002, 05:25 AM

I recommend Arctic Alumina Epoxy.. Transfers heat great, doesn't conduct electricity at all. Holds the heatsink on just find, and comes off when you want it to without a hassle.

03-12-2002, 10:33 AM	#1
the creature Cooling Savant Join Date: Jun 2001 Location: Norway Posts: 108	A good glue that transfear heat well? What glue should I use? It should be possible to remove what I glued later, without put it in the freezer.

03-12-2002, 11:20 AM	#2
cybrsamurai Cooling Savant Join Date: Jan 2002 Location: Ashland Posts: 296	I use artic silver thermal adhesive mixed with a small amount of artic silver. It transfers heat well and bonds fairly well depending on how much AS you mix with the adhesive. http://www.articsilver.com/arctic_si...l_adhesive.htm __________________ Air cooled my ass.

03-12-2002, 02:08 PM	#3
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	you can use AS Alumina Epoxy as well, which doesn't conduct electricity, transfers heat really well, and bonds like normal epoxy __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

03-12-2002, 04:13 PM	#4
RedTalon19 Cooling Neophyte Join Date: Nov 2001 Location: PA Posts: 96	i also recommend acrtic silver epoxy of some sort wheater its the origianl or the alumina stuff. if you want to be able to remove it with ease later on just add some regular acrtic silver thermal paste into the mix __________________ i am myself not anybody else and thats who i am and not who you are so dont be like me because i am myself.

03-16-2002, 02:35 PM	#5
ksw Cooling Savant Join Date: Feb 2002 Location: SWEDEN(cold...) Posts: 195	superglue and AS III is a good combo 2/8 mix __________________ www.webraced.com <- addicted as hell /me is!

03-17-2002, 05:25 AM	#6
UnaClocker Cooling Savant Join Date: Apr 2000 Location: Bremerton, WA Posts: 514	I recommend Arctic Alumina Epoxy.. Transfers heat great, doesn't conduct electricity at all. Holds the heatsink on just find, and comes off when you want it to without a hassle. __________________ The UnaClocker Watercooler Extraordinaire! Overclock till it goes BOOM!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)