![]() | ||
|
|
General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums. |
![]() |
Thread Tools |
![]() |
#1 |
Cooling Savant
Join Date: May 2001
Location: Brussels - Belgium
Posts: 232
|
![]()
Part One
In addition to my thread http://forums.procooling.com/ubbcgi/...c&f=2&t=000555 here are some more pics: ![]() The relay, mounted and connected. ![]() Idem. ![]() Details of the AC line connection for the pump. ![]() Details of the airtrap. ![]() Pump and Filling&Bleeding system. ![]() Remark the piece of 20mm silicone tube between pump and PVC tubing. CD ![]()
__________________
My website: http://www.turbokeu.com Backup website: http://www2.turbokeu.com My company: http://www.kdcs.be Last edited by Turbokeu; 06-23-2002 at 04:12 AM. |
![]() |
![]() |
![]() |
#2 |
Cooling Savant
Join Date: May 2001
Location: Brussels - Belgium
Posts: 232
|
![]()
Part Two
![]() I replaced the original 2-wire cable (with a big Molex) of the fanspeedselector on the front panel by a 3-wire cable with a little Molex. Through a drilled hole in the PCB I connected the third wire with the RPM monitoring connection of one of the two front fans. ![]() Rear view of the fanspeedselector. The wires are glued with a gluegun. ![]() "Purple Ice" anti-corrosion additive and green Fluo Dye Lite. ![]() These are the parts that I used for modding the Swiftech MCW462. 1/4" to 1/4 nipple (drilled to 10mm internally), a 90° 15mm copper turn and a piece of 15mm copper tube, all hardsoldered together. ![]() Compared to the original swivel connectors of the MCW462. ![]() Comparision of the ID of a standard 3/8" brass hosenipple and a 20mm PVC tube. ![]() One of my 30cm (12") CCFT Black Lights and a pink one + convertors. CD ![]()
__________________
My website: http://www.turbokeu.com Backup website: http://www2.turbokeu.com My company: http://www.kdcs.be Last edited by Turbokeu; 06-23-2002 at 04:14 AM. |
![]() |
![]() |
![]() |
#3 |
Cooling Savant
Join Date: May 2001
Location: Brussels - Belgium
Posts: 232
|
![]()
Part Three
![]() One of the clamps for the 20mm PVC. ![]() Original "PSU mounting plate". ![]() What you need to hardsolder. ![]() Front view of my "CPU clock indicator" ![]() Details of the CPU clock indicator. I will post some pics with the circuit filled with water when the Black Lights are installed. CD ![]()
__________________
My website: http://www.turbokeu.com Backup website: http://www2.turbokeu.com My company: http://www.kdcs.be Last edited by Turbokeu; 06-23-2002 at 04:17 AM. |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|