Finally got around to posting pics of my system

xerka · 04-03-2002, 07:10 PM

I've been done for awhile now I just haven't got around to posting pics. I need to update the picture of the front of the case because I repainted it so it all matches better. The two little things by the floppy drive are:a light to see if the pump is on, and fan control for the big 120mm blowing over the radiator. Right now the radiator is sorta weak, hope to get a new heater core sometime soon. The pump turns on with a relay but i also have it wired so i can turn it on without turning on my whole system. The air trap is sorta a rip offf of turbokeu's. The waterblock is the old original DD maze with the new mounting system that uses the 4 holes(hope to get one of those new maze 3s). Sorry no temps yet because i am waiting for one of those dual compu nurses. The system works great and is very quiet. Oh yeah and it's a mag drive pump. Comments, suggestions, something you hate or like?

xerka · 04-03-2002, 07:11 PM

are my pics even showing up to you guys???????????

PetDMC · 04-03-2002, 07:14 PM

x

sunblade · 04-03-2002, 07:22 PM

If you have to host on geocities, they'll block links from other sites if the extension if for a jpeg, gif, or other image. To use geocities and show the images here, you need to rename the extension to something like htm or css so they don't block them.

xerka · 04-03-2002, 07:33 PM

Sorry for the stupidity of using geocities i was to lazy to go on my other comp and ftp them to my site.

PetDMC · 04-03-2002, 07:39 PM

sweet

nice air~trap too

not much room left in that case

Psychotic · 04-03-2002, 07:41 PM

Not too shabby.

One question though... how are you bleeding it? It looks like your wb is higher than your res?

Brad · 04-03-2002, 10:44 PM

I like the duct for the fan out the front, did you get that idea from the Pro/Mini?

The res looks cool too

Kevin · 04-04-2002, 03:25 AM

Looks pretty hot, dude. The cooling system is very clean. Clean up the wires and drive cables

-Kev

resago · 04-04-2002, 10:27 AM

If you have any problems of your games not wanting to run the resolution it should for your video card, The problem will be EMI from the pump.

Cappu · 04-04-2002, 02:30 PM

Nice setup you got build there...

I'm poking around trying to put together a small yet effective airtrap.

xerka · 04-04-2002, 05:45 PM

Quote:

One question though... how are you bleeding it? It looks like your wb is higher than your res?

The waterblock is a little higher than the air trap. To bleed it I just ran it for a day or so and I didnt seem to have any problems with air bubbles.

Quote:

I like the duct for the fan out the front, did you get that idea from the Pro/Mini?

Actually I didnt get the exact thing from the pro/mini I was walking through ace hardware and saw some tin sheets and decided to make an air duct, I can't remember now but i think i got the original idea to mount the radiator on the front from soome procooling article.

Quote:

Clean up the wires and drive cables

Yeah i need to, next time I order alot of stuff from a computer site i plan on getting rounded cables. After the pic i made it look somewhat better though.

04-03-2002, 07:10 PM	#1
xerka Cooling Savant Join Date: Mar 2001 Location: Denver, CO Posts: 107	Finally got around to posting pics of my system I've been done for awhile now I just haven't got around to posting pics. I need to update the picture of the front of the case because I repainted it so it all matches better. The two little things by the floppy drive are:a light to see if the pump is on, and fan control for the big 120mm blowing over the radiator. Right now the radiator is sorta weak, hope to get a new heater core sometime soon. The pump turns on with a relay but i also have it wired so i can turn it on without turning on my whole system. The air trap is sorta a rip offf of turbokeu's. The waterblock is the old original DD maze with the new mounting system that uses the 4 holes(hope to get one of those new maze 3s). Sorry no temps yet because i am waiting for one of those dual compu nurses. The system works great and is very quiet. Oh yeah and it's a mag drive pump. Comments, suggestions, something you hate or like? Last edited by xerka; 04-03-2002 at 07:32 PM.

04-03-2002, 07:41 PM	#7
Psychotic Cooling Neophyte Join Date: Mar 2002 Location: currently in hiding after a recent escape from the psychiatric ward of a local hospital Posts: 69	Not too shabby. One question though... how are you bleeding it? It looks like your wb is higher than your res? __________________ I don't suffer from insanity. I enjoy every minute of it.

04-03-2002, 10:44 PM	#8
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	I like the duct for the fan out the front, did you get that idea from the Pro/Mini? The res looks cool too __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

04-04-2002, 03:25 AM	#9
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	Looks pretty hot, dude. The cooling system is very clean. Clean up the wires and drive cables -Kev __________________ I used to throw hot coffee all over the ass of the horse there, then whip him while he was kickin' at me. Those f***in things are crazy.

04-04-2002, 10:27 AM	#10
resago Cooling Savant Join Date: Mar 2001 Location: state of denial Posts: 488	If you have any problems of your games not wanting to run the resolution it should for your video card, The problem will be EMI from the pump. __________________ 2.4Ghz Compaq Workstation 2.8Ghz Custom 2700+ Custom still running 2000!!!! Help with Coding www.resago.com

04-03-2002, 07:11 PM	#2
xerka Cooling Savant Join Date: Mar 2001 Location: Denver, CO Posts: 107	are my pics even showing up to you guys???????????

04-03-2002, 07:14 PM	#3
PetDMC Cooling Savant Join Date: Jan 2002 Location: Toronto, Canada Posts: 109	x

04-03-2002, 07:22 PM	#4
sunblade Registered User Join Date: Jul 2001 Location: USA Posts: 156	If you have to host on geocities, they'll block links from other sites if the extension if for a jpeg, gif, or other image. To use geocities and show the images here, you need to rename the extension to something like htm or css so they don't block them.

04-03-2002, 07:33 PM	#5
xerka Cooling Savant Join Date: Mar 2001 Location: Denver, CO Posts: 107	Sorry for the stupidity of using geocities i was to lazy to go on my other comp and ftp them to my site.

04-03-2002, 07:39 PM	#6
PetDMC Cooling Savant Join Date: Jan 2002 Location: Toronto, Canada Posts: 109	sweet nice air~trap too not much room left in that case

04-04-2002, 02:30 PM	#11
Cappu Cooling Neophyte Join Date: Feb 2002 Location: Denmark Posts: 30	Nice setup you got build there... I'm poking around trying to put together a small yet effective airtrap. __________________ Best regards Cappu "The Spice Extends Life - The Spice Expands Consciousness - The Spice Is Vital To Spacetravel" www.kabu.dk

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)