HWLabs "Black Ice" radiator enough for 1.4gHz T-bird?? - Page 2

BrianW · 07-06-2001, 02:06 AM

Pretty much got it right. One thing is www.mcmaster.com doesn't measure that way. Please check out the site and search for "threaded nylon rod". They give regular diameters down to 1/4". Smaller than that, i'm not sure of their system.

Thanks again for all your help.

mkosem · 07-06-2001, 10:40 PM

where were you plannin on purchasing that FS020 from, I've been looking for one for a while and no one seems to be able to get them so I can buy one probably since it's a fairly new product.

--Matt

krp · 07-09-2001, 08:05 AM

I purchased my FS020 case from Jim Hanson at Coolcases and had him modify it slightly (punch out the sheet-metal fan grills and replace the factory fan with 3 Panaflo FBA12G12L1A low noise fans with wire grills.)

Another site that carries the FS020 is Outside Loop Computers

TNT2bluz · 07-09-2001, 12:14 PM

I'll be putting up pics of the demo rig soon.

It will power a 1.2GHz T-bird to about 1.5 to 1.7GHz no pelts yet.

07-06-2001, 02:06 AM	#26
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	Pretty much got it right. One thing is www.mcmaster.com doesn't measure that way. Please check out the site and search for "threaded nylon rod". They give regular diameters down to 1/4". Smaller than that, i'm not sure of their system. Thanks again for all your help. __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)

07-09-2001, 08:05 AM	#28
krp Cooling Neophyte Join Date: Jun 2001 Location: Gainesville, FL, USA Posts: 32	I purchased my FS020 case from Jim Hanson at Coolcases and had him modify it slightly (punch out the sheet-metal fan grills and replace the factory fan with 3 Panaflo FBA12G12L1A low noise fans with wire grills.) Another site that carries the FS020 is Outside Loop Computers __________________ chilling out in the swamp... (#1) Athlon XP@1.667gHz, watercooled: (DD Maze2 new revision, Eheim 1250, BlackiceXtreme), in modded Supermicro SC750 fulltower case. (#2) Athlon TB@1.4gHz, watercooled: (DD Maze2 orig revison, CaseEtc resepump, Blackice), in modded LiteOn FS020 midtower case.

07-06-2001, 10:40 PM	#27
mkosem Cooling Savant Join Date: May 2001 Location: here Posts: 494	where were you plannin on purchasing that FS020 from, I've been looking for one for a while and no one seems to be able to get them so I can buy one probably since it's a fairly new product. --Matt

07-09-2001, 12:14 PM	#29
TNT2bluz Cooling Savant Join Date: Jun 2001 Location: Secret Staging Grounds Ganymede Posts: 104	I'll be putting up pics of the demo rig soon. It will power a 1.2GHz T-bird to about 1.5 to 1.7GHz no pelts yet.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)