![]() | ||
|
|
Random Nonsense / Geek Stuff All those random tech ramblings you can't fit anywhere else! |
![]() |
Thread Tools |
![]() |
#1 |
The Pro/Life Support System
Join Date: Dec 1999
Location: Denver, CO
Posts: 4,041
|
![]()
Anyone else dealt with a cooled SMP solution??
------------------ C-ya Joe |
![]() |
![]() |
![]() |
#2 |
Cooling Neophyte
Join Date: Feb 2000
Location: no
Posts: 1
|
![]()
Haven't had any experience with SMP cooling yet but when I build my new system [hopefully soon!], I'm plan to buy an Abit BP6 with 2 Celeron 366s or 400s. Depending on how long I wait I'm thinking about possibly going with Powerleap PPGA to FCPGA converters and p3-550e's. This would increase the price by at least $650 though! The good thing though is that I'm hoping I can overclock them to about 775+ MHz a piece with either peltiers or water cooling. If you need any help with the site or news I'd be glad to help.
![]() ------------------ TJ Bain Yes! I finally found out what a "jumper" is! ROTFL! |
![]() |
![]() |
![]() |
#3 |
The Pro/Life Support System
Join Date: Dec 1999
Location: Denver, CO
Posts: 4,041
|
![]()
Make sure you got bandwith for Saturday or Sunday!!
The article that I am gonna make for the Project is going to include Stereaming RealVideo, and ALOT of GREAT quality pic's. I am borrowing a nice couple megapixel Digital Cam, and also a video cam to document it. Its gonna be rock'n! ALSO The guys at Coolchip.com have really been just great to me and the site. Because of them I will be doing 2 articles in a VERY short period of time. Still thinking of the proper "code name" for the next project but its going to be a SMP Celeron setup with their new S370 Coolers strapped on for the ride. Stay tuned! ------------------ C-ya Joe |
![]() |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
I have BP6 with 2 366's at 551 Mhz at 2.2 Volts and Running air cooling with alpha coolers on them... and cpuidle pro and cpu1 temp average no load 36C cpu2 36C Motherboard 40C errr. those are the temps with full 100% after approx 30 mins... no load is CPU1 30C CPU2 30C Motherboard 32C
|
![]() |
![]() |
#5 |
Cooling Neophyte
Join Date: Feb 2000
Posts: 38
|
![]()
w2kr - sounds like you can benefit from some better case cooling.
shadow. |
![]() |
![]() |
![]() |
#6 |
Cooling Neophyte
Join Date: Oct 2000
Posts: 18
|
![]()
i was running a 694d w/ 2x 366@550 celeries. i was using watercooled peltiers before i scrapped it and sold it all. i didn't need the cooling. they still ran at 550 w/ gorbs. i just wanted to try h20/pelts out.
Fuzz Norelid |
![]() |
![]() |
![]() |
#7 |
Cooling Neophyte
Join Date: Feb 2001
Posts: 38
|
![]()
im setting up a abit bp6 with two celeron 400's, i need an anwser here, do you think they would clock to 500 with just real good hsf's( like alpha and gorbs) or do you think i should go with 2 alpha pep66t's? LMK
|
![]() |
![]() |
![]() |
#8 |
The Pro/Life Support System
Join Date: Dec 1999
Location: Denver, CO
Posts: 4,041
|
![]()
The Celerons will like a bit more cooling then a standard HSF. To get a good stable OC, you may want to go with the better HSF's.
Wow I was amazed when I saw the dates on this thread ![]() ------------------ C-ya Joe - Owner/Editor www.ProCooling.com Where the Completely Addicted Come to Cool Off Somebody set up us the bomb. |
![]() |
![]() |
![]() |
#9 |
Cooling Savant
Join Date: Oct 2000
Location: Rockledge,FL,US
Posts: 731
|
![]()
I was gonna H2O cool my Dual Celeron 533 system, but I kinda lost one of the chips, don't have the SMP APIC module to run SMP, didn't have 2 heatsinks to make waterblocks out of, and don't/didn't have the money for a pump. But I might try later.
------------------ Watercooled K6-2 450 at 600 |
![]() |
![]() |
![]() |
#10 |
The Pro/Life Support System
Join Date: Dec 1999
Location: Denver, CO
Posts: 4,041
|
![]()
heheh you were just a lil short on a lot of stuff
![]() ------------------ C-ya Joe - Owner/Editor www.ProCooling.com Where the Completely Addicted Come to Cool Off Somebody set up us the bomb. |
![]() |
![]() |
![]() |
#11 |
Cooling Savant
Join Date: Oct 2000
Location: Rockledge,FL,US
Posts: 731
|
![]() |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|