Peltier contact paste/gel???????

newhit · 04-28-2002, 01:00 PM

Hi to all

Is there any advantages (temps, longevity etc) in using this stuff over AS3 when applied to tecs......

http://www.over-clock.co.uk/acatalog...cessories.html

04-28-2002, 04:14 PM

I think what they say AS is bad they're thinking if it doesn't get appropriate pressure (150-300+ PSI) and their solution may be designed for low-pressure. If you have a good block like a Danger Den MAZE2 with the cold plate screwed on well enough to give the required pressure, arctic silver will work nicely.

Brad · 04-29-2002, 02:31 AM

dunno what they are on about, just use AS3, and screw the coldplate down very tightly

04-28-2002, 01:00 PM	#1
newhit Cooling Neophyte Join Date: Apr 2001 Location: uk Posts: 22	Peltier contact paste/gel??????? Hi to all Is there any advantages (temps, longevity etc) in using this stuff over AS3 when applied to tecs...... http://www.over-clock.co.uk/acatalog...cessories.html __________________ Rig 1 Epox 8KHA+ XP1600 AGNGA-Y 1936MHz @2.08v, 176x11. NEW Swiftech MCW462UT-H (226W tec) rover (uk) hcore. Winbond 5ns mem. Leadtek Ti200. SBLive5.1. Maxtor D740 20Gb HD. WXP Pro, . Heavily modded Yeong Yang cube with all fans powered off the PC psu through Papst fan controllers. Rigs+mbike Rig 2 SUPER (YES!! WITH WINXP) XP333R BACK (8K3A+ STOLEN BY UNI CONSCRIPT). TBird (unlocked)1200@1400, TwinMOS/samsung 5ns mem. Modded GW802 case with 12v/7v cpu/case fans

04-29-2002, 02:31 AM	#3
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	dunno what they are on about, just use AS3, and screw the coldplate down very tightly __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

04-28-2002, 04:14 PM	#2
IronHelix Guest Posts: n/a	I think what they say AS is bad they're thinking if it doesn't get appropriate pressure (150-300+ PSI) and their solution may be designed for low-pressure. If you have a good block like a Danger Den MAZE2 with the cold plate screwed on well enough to give the required pressure, arctic silver will work nicely.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)