Pic's of my new w/c setup

UpAllNight · 05-01-2002, 08:20 PM

water temp is left
cpu is right

Fixittt · 05-01-2002, 08:39 PM

I built a p4 server in that exact case today. 3 37 gig scsi baracudas in a raid 5 Man was it sweet.

Very nice allnight. I like it alot

UpAllNight · 05-01-2002, 08:43 PM

wow fixittt thats some serious money in some hard drives

Fixittt · 05-01-2002, 09:11 PM

$400 each, and the raid controller was anoter $300
Its a bad ass server. 1 gig ddr ram. SWEEET! I was playing with the raid 5 today, In the software that came with the card, I could kill one drive, totally whipe it while the machine was running, and it would rebuild the drive without missing a beat.

hey upallnight, U got a Private message.

webmedic · 05-01-2002, 09:19 PM

What did you run on that fixittt

Cyco-Dude · 05-01-2002, 11:02 PM

to UpAllNight:
what did you make that shroud out of? how did you attach it to the rad?

to Fix:
damn lol

Fixittt · 05-01-2002, 11:04 PM

we are running win 2000 server on it. Its for a company, wish I could keep it, but no.........

webmedic · 05-01-2002, 11:10 PM

Not sure about his but heres my fan shroud:
http://community.webshots.com/album/35111553UecmAe

arcanus · 05-02-2002, 02:20 AM

UpAllNight, did you make a cut in the front of your case to allow better airflow for the heatercore? There's only grating for two 80mms. I'm basically getting the same watercooling setup as you, except with a heatercore from dtekcustoms.com. I plan on cutting the front of the case to allow the fan to work better.

Also, how did you mount the radiator and the pump? Are they attached to the case or just sitting there?

One last question: How did you go about setting up your T-fitting for filling up and bleeding? Is it that one long tube going up past the drive cage towards the top? How did you fill up?

Brad · 05-02-2002, 02:35 AM

very nice clean setup there....and it performs well too.

great job

UpAllNight · 05-02-2002, 06:53 AM

Thanx brad

well my fan shroud is made out of .03 thick sheet metal and welded on the edges...its a very tight fit to my rad so i dont have anything holding it to my rad...and yes i did attatch my rad to my case with some 6-32 threaded rod and JB weld...and i cut a square out of the front of my case...and drilled 4 holes to mount my rad with...needless to say shroud was the worst part..the pump is just sitting there on top of a mouse pad...check out the right up on the homepage of this site for the way to bleed and fill a closed lood system...thats where i got my info from

ambient · 05-02-2002, 04:03 PM

Quote:

I built a p4 server in that exact case today. 3 37 gig scsi baracudas in a raid 5 Man was it sweet.

I built the same thing for a company I used to work for. Cept mine had 6 x 36gb SCSI 3 ultra160's raid5 with one as a hot spare. Wish I could've kept it too ;-) . Mine was a 2x p3 1ghz on a supermicro board.

zervun · 05-02-2002, 06:12 PM

what radiator is that btw? is that the chevy chevette one? I have the exact same case

zervun · 05-02-2002, 06:13 PM

oh yea was also wondering, do you have the fan pushing or pulling, and also I saw you have a floppy drive in there, so I gather you aren't using the fan that mounts in the HD case. Are you worried about your HD getting hot?

UpAllNight · 05-02-2002, 07:00 PM

Quote:

oh yea was also wondering, do you have the fan pushing or pulling, and also I saw you have a floppy drive in there, so I gather you aren't using the fan that mounts in the HD case. Are you worried about your HD getting hot?

Quote:

what radiator is that btw? is that the chevy chevette one? I have the exact same case

i have my fan pull air through my Rad...the cage that holds a 80mm fan is total gone dude i had to remove it to fit a rad in

i neve had a hard drive in that cage anyway...my harddrive is cool enough for me where it is

and yes it is a chevy chevette rad

zervun · 05-02-2002, 08:29 PM

thanks for the info, looks very nice btw

05-01-2002, 08:20 PM	#1
UpAllNight Cooling Savant Join Date: Apr 2002 Location: HILLBILLY LAND Posts: 159	Pic's of my new w/c setup water temp is left cpu is right __________________ XP1800 @172x10.5 Maze 3..Ehiem 1250..Chevette Rad 1 120mm panaflo @7v 1" shroud All fits nicely inside my case ambient(74 F) 2.0v Core(33.5) Loaded idle(31.5c) Enermax 431 watt Antec 1030B Gainward Geforce 3 TI200 241/548 Sony CDRW Creative 52x CD Soundblaster Live Last edited by UpAllNight; 05-01-2002 at 08:27 PM.

05-01-2002, 08:39 PM	#2
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	I built a p4 server in that exact case today. 3 37 gig scsi baracudas in a raid 5 Man was it sweet. Very nice allnight. I like it alot __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808

05-01-2002, 08:43 PM	#3
UpAllNight Cooling Savant Join Date: Apr 2002 Location: HILLBILLY LAND Posts: 159	wow fixittt thats some serious money in some hard drives __________________ XP1800 @172x10.5 Maze 3..Ehiem 1250..Chevette Rad 1 120mm panaflo @7v 1" shroud All fits nicely inside my case ambient(74 F) 2.0v Core(33.5) Loaded idle(31.5c) Enermax 431 watt Antec 1030B Gainward Geforce 3 TI200 241/548 Sony CDRW Creative 52x CD Soundblaster Live

05-01-2002, 09:11 PM	#4
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	$400 each, and the raid controller was anoter $300 Its a bad ass server. 1 gig ddr ram. SWEEET! I was playing with the raid 5 today, In the software that came with the card, I could kill one drive, totally whipe it while the machine was running, and it would rebuild the drive without missing a beat. hey upallnight, U got a Private message. __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808

05-01-2002, 09:19 PM	#5
webmedic Cooling Savant Join Date: Dec 2001 Location: Cheney, Wa Posts: 367	What did you run on that fixittt __________________ www.water-cool.com

05-01-2002, 11:02 PM	#6
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	to UpAllNight: what did you make that shroud out of? how did you attach it to the rad? to Fix: damn lol

05-01-2002, 11:04 PM	#7
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	we are running win 2000 server on it. Its for a company, wish I could keep it, but no......... __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808

05-01-2002, 11:10 PM	#8
webmedic Cooling Savant Join Date: Dec 2001 Location: Cheney, Wa Posts: 367	Not sure about his but heres my fan shroud: http://community.webshots.com/album/35111553UecmAe __________________ www.water-cool.com

05-02-2002, 02:20 AM	#9
arcanus Cooling Neophyte Join Date: May 2002 Location: scottsdale az Posts: 5	UpAllNight, did you make a cut in the front of your case to allow better airflow for the heatercore? There's only grating for two 80mms. I'm basically getting the same watercooling setup as you, except with a heatercore from dtekcustoms.com. I plan on cutting the front of the case to allow the fan to work better. Also, how did you mount the radiator and the pump? Are they attached to the case or just sitting there? One last question: How did you go about setting up your T-fitting for filling up and bleeding? Is it that one long tube going up past the drive cage towards the top? How did you fill up?

05-02-2002, 02:35 AM	#10
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	very nice clean setup there....and it performs well too. great job __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

05-02-2002, 06:53 AM	#11
UpAllNight Cooling Savant Join Date: Apr 2002 Location: HILLBILLY LAND Posts: 159	Thanx brad well my fan shroud is made out of .03 thick sheet metal and welded on the edges...its a very tight fit to my rad so i dont have anything holding it to my rad...and yes i did attatch my rad to my case with some 6-32 threaded rod and JB weld...and i cut a square out of the front of my case...and drilled 4 holes to mount my rad with...needless to say shroud was the worst part..the pump is just sitting there on top of a mouse pad...check out the right up on the homepage of this site for the way to bleed and fill a closed lood system...thats where i got my info from __________________ XP1800 @172x10.5 Maze 3..Ehiem 1250..Chevette Rad 1 120mm panaflo @7v 1" shroud All fits nicely inside my case ambient(74 F) 2.0v Core(33.5) Loaded idle(31.5c) Enermax 431 watt Antec 1030B Gainward Geforce 3 TI200 241/548 Sony CDRW Creative 52x CD Soundblaster Live

05-02-2002, 06:12 PM	#13
zervun Cooling Neophyte Join Date: Apr 2002 Location: Portland, OR Posts: 17	what radiator is that btw? is that the chevy chevette one? I have the exact same case __________________ zervun@hotmail.com Heatware Epox 4BDA i845 Chipset 1.6a Costa Rica @2.4 @1.65v Samsung pc2700 512mb @2.8v Maxtor 7200rpm 20gig ATA133 TDK 32x10x40x CDRW \|\| Acer 50x CDrom Leadteck A250 ti4400 305/650 Chieftech Server Case w/Chain Well 420watt PS FrontX Multimedia Ports Belkin 10/100TX Network Card Cambridge Soundworks Flat

05-02-2002, 06:13 PM	#14
zervun Cooling Neophyte Join Date: Apr 2002 Location: Portland, OR Posts: 17	oh yea was also wondering, do you have the fan pushing or pulling, and also I saw you have a floppy drive in there, so I gather you aren't using the fan that mounts in the HD case. Are you worried about your HD getting hot? __________________ zervun@hotmail.com Heatware Epox 4BDA i845 Chipset 1.6a Costa Rica @2.4 @1.65v Samsung pc2700 512mb @2.8v Maxtor 7200rpm 20gig ATA133 TDK 32x10x40x CDRW \|\| Acer 50x CDrom Leadteck A250 ti4400 305/650 Chieftech Server Case w/Chain Well 420watt PS FrontX Multimedia Ports Belkin 10/100TX Network Card Cambridge Soundworks Flat

05-02-2002, 08:29 PM	#16
zervun Cooling Neophyte Join Date: Apr 2002 Location: Portland, OR Posts: 17	thanks for the info, looks very nice btw __________________ zervun@hotmail.com Heatware Epox 4BDA i845 Chipset 1.6a Costa Rica @2.4 @1.65v Samsung pc2700 512mb @2.8v Maxtor 7200rpm 20gig ATA133 TDK 32x10x40x CDRW \|\| Acer 50x CDrom Leadteck A250 ti4400 305/650 Chieftech Server Case w/Chain Well 420watt PS FrontX Multimedia Ports Belkin 10/100TX Network Card Cambridge Soundworks Flat

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)