another suck or blow question (not rad)

fourminuszero · 10-24-2001, 11:35 AM

as the subject line says this is another suck or blow question. hehe.
in my closed wc setup i have the 'T' bleeder thing going.
my question is, should the 'T' be on the intake or out side of the pump?
if this is obvious, go ahead and tell me.
sometimes i'm a lazy thinker.

system specs are
maze2
danner 350
dtek cooler core.
bleeding air out is a pain in my ass, but i don't have room for that smooth swiftech bleeder system, nor the desire to go with a reservoir.
oh crap i almost forgot, what is the general consensus on which way to go with the water?
right now i go
pump--->maze--->rad...

damn what a long post.

gracias.

i am,
pedro.

Kevin · 10-24-2001, 01:02 PM

put the T on the sucking side of the pump

.
-Kevin

[ 10-24-2001: Message edited by: Kevin ]

terabyte · 10-24-2001, 01:14 PM

yeah what he said and change the order to
pump to rad to maze to "T" to pump

fourminuszero · 10-24-2001, 01:15 PM

gracias kev.
that's the way i've been running it, but i am a dummy sometimes, so it never hurts to double check.

i'm using joe's method of bleeding now, and it seems to be working better. faster anyway.

thanks again.

i am,
pedro.

Kevin · 10-24-2001, 03:26 PM

no problemo!

10-24-2001, 11:35 AM	#1
fourminuszero Cooling Neophyte Join Date: Oct 2001 Posts: 5	another suck or blow question (not rad) as the subject line says this is another suck or blow question. hehe. in my closed wc setup i have the 'T' bleeder thing going. my question is, should the 'T' be on the intake or out side of the pump? if this is obvious, go ahead and tell me. sometimes i'm a lazy thinker. system specs are maze2 danner 350 dtek cooler core. bleeding air out is a pain in my ass, but i don't have room for that smooth swiftech bleeder system, nor the desire to go with a reservoir. oh crap i almost forgot, what is the general consensus on which way to go with the water? right now i go pump--->maze--->rad... damn what a long post. gracias. i am, pedro.

10-24-2001, 01:02 PM	#2
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	put the T on the sucking side of the pump . -Kevin [ 10-24-2001: Message edited by: Kevin ] __________________ I used to throw hot coffee all over the ass of the horse there, then whip him while he was kickin' at me. Those f***in things are crazy.

10-24-2001, 03:26 PM	#5
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	no problemo! __________________ I used to throw hot coffee all over the ass of the horse there, then whip him while he was kickin' at me. Those f***in things are crazy.

10-24-2001, 01:14 PM	#3
terabyte Cooling Neophyte Join Date: Mar 2001 Posts: 44	yeah what he said and change the order to pump to rad to maze to "T" to pump

10-24-2001, 01:15 PM	#4
fourminuszero Cooling Neophyte Join Date: Oct 2001 Posts: 5	gracias kev. that's the way i've been running it, but i am a dummy sometimes, so it never hurts to double check. i'm using joe's method of bleeding now, and it seems to be working better. faster anyway. thanks again. i am, pedro.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)