Placement of new pipes suggestions needed

dantheman · 09-18-2001, 06:28 PM

Well, If you remember the guy who put the pipes that could be opened and closed to fill or empty the system easily. . . I have made something simular to that. The only problem is that I didn't expect it to be near as big as it was when assembled. Now. . . There are way too many mods on this case to just say "time for a bigger case". I thought about makeing the pipes exit the case and then reenter the case. The problem is that It is an old AT case converted to ATX. Thus the case itself is all one peice. How would I work quick disconnects in this case, or can you think of a better way to do this when I have to take off the case to change out hardware? I have supplyed pictures, but they won't show up by just clicking on them, cut and paste into your browser to see them.

Hose where peice would be inputed: http://dantheman.5u.com/DCP_2024.JPG

Peice next to hose: http://dantheman.5u.com/DCP_2025.JPG

Peice by itself (it will be painted to match the case): http://dantheman.5u.com/DCP_2026.JPG

Back Side of case where part would be connected to. The part would be put on so it would not move. Will more then likely be done with brackets: http://dantheman.5u.com/DCP_2027.JPG

Showing the AT Case as a side view: http://dantheman.5u.com/DCP_2028.JPG

The pipe has to go out the case, and be removabe w/o emptying the water from the system first. Any Ideas?

redleader · 09-19-2001, 12:20 AM

I can't view those pics. Since we both use SprintBroadBand Direct in Az, let me recommend that you use the 20MB that comes with the account for picture hosting. It tends to wirk pretty good, or at least they haven't killed my pics yet.

dantheman · 09-19-2001, 07:43 AM

Umm, I don't use sprint. . . . .I am a Road Runner customer. I will work on the pic though, sorry.

redleader · 09-21-2001, 05:53 PM

:o

Sorry that was my information on that error message. Nevermind. BTW, pics work fine.

[ 09-21-2001: Message edited by: redleader ]

dantheman · 09-21-2001, 08:31 PM

Ok, update. . . . I found it won't work with the space I have.

But! I have changed the setup and will be installing it onto the front of my case as soon as my quick disconnects come in. Heh. THanks

Overlag · 09-21-2001, 09:23 PM

for anyone having a problem with the pics just put a ? at the end

09-18-2001, 06:28 PM	#1
dantheman Cooling Savant Join Date: Jun 2001 Posts: 152	Placement of new pipes suggestions needed Well, If you remember the guy who put the pipes that could be opened and closed to fill or empty the system easily. . . I have made something simular to that. The only problem is that I didn't expect it to be near as big as it was when assembled. Now. . . There are way too many mods on this case to just say "time for a bigger case". I thought about makeing the pipes exit the case and then reenter the case. The problem is that It is an old AT case converted to ATX. Thus the case itself is all one peice. How would I work quick disconnects in this case, or can you think of a better way to do this when I have to take off the case to change out hardware? I have supplyed pictures, but they won't show up by just clicking on them, cut and paste into your browser to see them. Hose where peice would be inputed: http://dantheman.5u.com/DCP_2024.JPG Peice next to hose: http://dantheman.5u.com/DCP_2025.JPG Peice by itself (it will be painted to match the case): http://dantheman.5u.com/DCP_2026.JPG Back Side of case where part would be connected to. The part would be put on so it would not move. Will more then likely be done with brackets: http://dantheman.5u.com/DCP_2027.JPG Showing the AT Case as a side view: http://dantheman.5u.com/DCP_2028.JPG The pipe has to go out the case, and be removabe w/o emptying the water from the system first. Any Ideas?

09-21-2001, 09:23 PM	#6
Overlag Cooling Neophyte Join Date: Sep 2001 Location: Essex UK Posts: 21	for anyone having a problem with the pics just put a ? at the end __________________ From Overlag AKA Adam Webb CPU:A64 3200\|2000 @ 2350mhz MB:Asus K8V Ram:512mb PC3200 Corsair @ 235 2-3-3-6 GFX:ATI 9700pro 357/337 Cooling:watercooled DD maze2-1 modded 20431

09-19-2001, 12:20 AM	#2
redleader Thermophile Join Date: Jun 2001 Location: The deserts of Tucson, Az Posts: 1,264	I can't view those pics. Since we both use SprintBroadBand Direct in Az, let me recommend that you use the 20MB that comes with the account for picture hosting. It tends to wirk pretty good, or at least they haven't killed my pics yet.

09-19-2001, 07:43 AM	#3
dantheman Cooling Savant Join Date: Jun 2001 Posts: 152	Umm, I don't use sprint. . . . .I am a Road Runner customer. I will work on the pic though, sorry.

09-21-2001, 05:53 PM	#4
redleader Thermophile Join Date: Jun 2001 Location: The deserts of Tucson, Az Posts: 1,264	:o Sorry that was my information on that error message. Nevermind. BTW, pics work fine. [ 09-21-2001: Message edited by: redleader ]

09-21-2001, 08:31 PM	#5
dantheman Cooling Savant Join Date: Jun 2001 Posts: 152	Ok, update. . . . I found it won't work with the space I have. But! I have changed the setup and will be installing it onto the front of my case as soon as my quick disconnects come in. Heh. THanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)